ONKYO SR805 Manual Do Utilizador
37
Connecting Your Components
—Continued
Making HDMI Connections
■
Video Signals
Digital video signals received by the HDMI IN jacks are normally output by the HDMI OUT for display on your TV.
Composite video, S-Video, and component video sources can be upconverted for the HDMI output. See “Video Con-
nection Formats” on page 28 for more information.
Composite video, S-Video, and component video sources can be upconverted for the HDMI output. See “Video Con-
nection Formats” on page 28 for more information.
■
Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI OUT, unless the HDMI Audio Out setting is set to On (see
page 99).
receiver. Normally, they are not output by the HDMI OUT, unless the HDMI Audio Out setting is set to On (see
page 99).
To listen to audio received by the HDMI IN jacks through your TV’s speakers, set the HDMI Audio
Out setting to On (see page 99), and set your DVD player’s HDMI audio output setting to PCM.
Out setting to On (see page 99), and set your DVD player’s HDMI audio output setting to PCM.
When listening to audio from an HDMI component through the AV receiver’s speakers, set the HDMI
component so that its video can be seen on your TV (e.g., on your TV, select the input to which the
HDMI component is connected). If your TV is not turned on or a different input is selected, the AV
receiver's speakers may produce no sound or the sound may be cut off.
component so that its video can be seen on your TV (e.g., on your TV, select the input to which the
HDMI component is connected). If your TV is not turned on or a different input is selected, the AV
receiver's speakers may produce no sound or the sound may be cut off.
Note:
• When the HDMI Audio setting is set to On (see page 99), or TV Control is set to Enable and you’re listening through
your TV’s speakers, if you turn up the AV receiver’s volume control, the sound will be output by the AV receiver’s
speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD player, TV,
projector, and so on.
projector, and so on.
Step 2: Assign each HDMI IN to an input selector. See “HDMI Input Setup” on page 48.
Hint!
RS232
DIGITAL
COAXIAL
OPTICAL
REMOTE
CONTROL
CONTROL
IN 1
IN 1
IN 2
IN
IN
IN
IN
PHONO
ZONE2 R
FRONT R
FRONT R
(BTL)
SURR R
CENTER
SURR L
SURR BACK R
CD
TAPE
AUX 1
GAME/TV
GAME/TV CBL/SAT
CBL/SAT
AUX 1
VCR/DVR
VCR/DVR
DVD
DVD
IR
IN
GND
IN 2
IN 3
L
L
V
V
S
S
R
R
ASSIGNABLE
(DVD)
(CBL/SAT)
(VCR/DVR)
(GAME/TV)
(CD)
OUT
HDMI
IN 1
IN 2
IN 3
IN 4
ASSIGNABLE
OUT
COMPONENT VIDEO
ASSIGNABLE
IN 3
Y
C
B
/P
B
C
R
/P
R
IN 2
IN 1(DVD)
MONITOR
OUT
OUT
IN
IN
OUT
IN
IN
FRONT
CENTER
SUBWOOFER
SURR
MULTI CH
SURR BACK
MONITOR
OUT
AM
ANTENNA
FM75
OUT
Bi-AMP
ZONE 2
OUT
HDMI
HDMI
IN 1
HDMI
IN
HDMI
OUT
TV
DVD player
TX-SR805_875_En.book Page 37 Thursday, April 26, 2007 3:00 PM