ONKYO TX-SR876 Manual Do Utilizador

133

If you’ve connected your Zone 2 or Zone 3 speakers to 
an amp with no volume control, set the “Zone2 Out” or 
“Zone3 Out” setting, respectively, to “Variable” so that 
you can set the zone’s volume, balance, and tone on the 
AV receiver.

Note:
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.

This section explains how to use Zone 2 and Zone 3.

Press the [RECEIVER] REMOTE 
MODE button, followed by the 
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “7. Hardware 
Setup”, and then press [ENTER].
The “Hardware Setup” menu appears.

q]/[w] but-

tons to select “2. Zone2/Zone3”, 
and then press [ENTER].
The “Zone2/Zone3” screen appears.

q]/[w] but-

e]/[r] buttons to 

The Zone 2 or Zone 3 volume must 
be set on the amp in that zone.

The Zone 2 or Zone 3 volume can 
be set on the AV receiver.

Press the [SETUP] button.
Setup closes.

RC-

687

M

+

-