ONKYO TX-SR876 Manual Do Utilizador

137

You can control your other components, including those 
made by other manufacturers, with the remote controller.
This section explains how to:
• Enter the remote control code for a component that 

you want to control: DVD, TV, VCR, etc.

• Learn commands directly from another component’s 

remote controller (see page 140).

• Program the MACRO buttons to perform a sequence 

of up to eight remote control actions (see page 141).

To control another component, you must first enter that 
component’s remote control code to a REMOTE MODE 
button. You’ll need to enter a code for each component 
that you want to control.

Notes:
• Remote control codes cannot be entered for the 

[RECEIVER], [ZONE 2], [ZONE 3], and 
[NET/USB] REMOTE MODE buttons.

• The remote control codes provided are correct at the 

time of printing but subject to change.

Look up the component’s remote 
control code in the separate 
Remote Control Codes list.
The codes are organized by category.

RC-

687

M

+

-

I

While holding down the REMOTE 
MODE button to which you want 
to enter the code, press the 
[STANDBY] button.
The Remote indicator lights up.

Within 30 seconds, use the num-
ber buttons to enter the 4-digit 
remote control code.
The Remote indicator flashes twice.

Press the REMOTE MODE button 
again to select the remote con-
troller mode, point the remote 
controller at the component, and 
check the operation.
If the remote controller doesn’t work as 
expected, and several remote codes are 
listed, try each one in turn and use the 
one that works best.

• The [DVD] and [CD] REMOTE MODE buttons 

are preprogrammed for use with Onkyo DVD 
players and CD players, respectively.

• To control another manufacturer’s CD recorder, 

MD recorder or Onkyo RI Dock, enter the appro-
priate remote control code to the [CD] REMOTE 
MODE button.