ONKYO TX-SR876 Manual Do Utilizador

46

■ CD Player or Turntable (MM) with Built-in Phono Preamp

• With connection 

, you can listen to and record audio from the CD player or listen in Zone 2 or Zone 3.

• To connect the CD player digitally, use connection 

 or 

. (To record or listen in Zone 2 or Zone 3 as well, 

use  

and , 

or  

and .)

■ Turntable (MM) with no Phono Preamp Built-in
The AV receiver’s PHONO IN is designed for use with a 
moving magnet (MM) type cartridge.

Use an analog audio cable to connect the AV receiver’s 
PHONO IN L/R jacks to the audio output on your turn-
table.

Notes:
• If your turntable has a ground wire, connect it to the 

AV receiver’s GND screw. With some turntables, con-
necting the ground wire may produce an audible hum. 
If this happens, disconnect it.

• If your turntable has a moving coil (MC) type car-

tridge, you’ll need a commercially available MC head 
amp or MC transformer. Connect your turntable to the 
head amp or transformer, and connect that to the AV 
receiver’s PHONO IN L/R jacks.

• You can also use a phono equalizer to connect a turn-

table with an MC-type cartridge. See your phono 
equalizer’s manual for details.

CD IN L/R

⇐

Analog audio L/R output

DIGITAL COAXIAL IN 2 (VCR/DVR)

⇐

Digital coaxial output

DIGITAL OPTICAL IN 2 (CD)

⇐

Digital optical output

Step 1:
Choose a connection that matches your CD player (

, 

, or 

). Use connection 

 for a turntable with a built-in 

phono preamp.

Connect one 
or the other 
Connection 

 must be 

assigned 
(see page 59)