ONKYO TX-NR905 Manual Do Utilizador
55
First Time Setup
—Continued
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT MAIN or HDMI
OUT SUB, the HDMI Monitor setting must be set to
Main or Sub, respectively (see page 52). See page 34
for more information on video signal flow and upcon-
version.
OUT SUB, the HDMI Monitor setting must be set to
Main or Sub, respectively (see page 52). See page 34
for more information on video signal flow and upcon-
version.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 58.
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 58.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
buttons.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “1. Input/Output
Assign,” and then press
[ENTER].
Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
appears.
3
Use the Up and Down [
]/[
]
buttons to select “2. HDMI Input,”
and then press [ENTER].
and then press [ENTER].
The HDMI Input menu appears.
4
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and use the Left and Right
[
tor, and use the Left and Right
[
]/[
] buttons to select:
IN1:
Select if the video component
is connected to HDMI IN 1.
is connected to HDMI IN 1.
IN2:
Select if the video component
is connected to HDMI IN 2.
is connected to HDMI IN 2.
IN3:
Select if the video component
is connected to HDMI IN 3.
is connected to HDMI IN 3.
IN4:
Select if the video component
is connected to HDMI IN 4.
is connected to HDMI IN 4.
- - -:
Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
outputs.
output composite video,
S-Video, and component
video sources from the HDMI
outputs.
5
Press the [SETUP] button.
Setup closes.
RECEIVER
SE
TUP
ENTER
ENTER
ENTER
ENTER
1-2.HDMI Input
DVD ---
VCR/DVR ---
CBL/SAT ---
GAME/TV ---
AUX1 ---
AUX2 ---
VCR/DVR ---
CBL/SAT ---
GAME/TV ---
AUX1 ---
AUX2 ---
ENTER
ENTER
SE
TUP
TX-NR905_En.book Page 55 Wednesday, January 23, 2008 1:36 PM