ONKYO TX-NR708 Manual Do Utilizador

En

The FRONT L/R and SURR BACK L/R terminal posts can be 
used with front speakers and surround back speakers respec-
tively, or bi-amped to provide separate tweeter and woofer feeds 
for a pair of front speakers that support bi-amping, providing 
improved bass and treble performance.
• When bi-amping is used, the AV receiver is able to drive up to 

a 5.1 speaker system in the main room.

• For bi-amping, the FRONT L/R terminal posts connect to the 

front speakers’ woofer terminals; the SURR BACK L/R ter-
minal posts connect to the front speakers’ tweeter terminals.

• Once you’ve completed the bi-amping connections shown 

below and turned on the AV receiver, you must set the 
“Speakers Type(Front)” setting to “Bi-Amp” to enable bi-
amping (

If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT 
jacks, and connect all speakers to the power amplifier.

• When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) 

terminals.

• Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual.

Woofer (low)

Left 

speaker

Tweeter (high)

Right 

speaker

a

b

c

d

f

g

e

*1

aFront left speaker
bCenter speaker
cFront right speaker
dSurround left speaker
eSurround right speaker
fSurround back/Front wide/Front high left speaker

*1

gSurround back/Front wide/Front high right speaker

*1

*1

Specify “None” for the channel that you don’t want to output 
(

SB···Surround Back, FH···Front High, FW···Front Wide

Power amplifier