ONKYO TX-NR708 Manual Do Utilizador

En

■

*2

`

0 to +10

With this setting you can adjust the sharpness of edges in 
the picture. “0” is the softest. “+10” is the sharpest.

■

*2

`

Off:

Noise reduction off.

`

Low:

Low noise reduction.

`

Mid:

Medium noise reduction.

`

High:

High noise reduction.

With this setting, you can reduce noise appearing on the 
screen.

• If  the  “Game Mode” setting is set to “On” (

52), this setting 

is fixed at “Off”.

■

*1*2

`

–50 to 0 to +50

With this setting you can adjust the picture bright-
ness. “–50” is the darkest. “+50” is the brightest.

■

*1*2

`

–50 to 0 to +50

With this setting you can adjust contrast. “–50” is the 
least. “+50” is the greatest.

■

*1*2

`

–20 to 0 to +20

With this setting you can adjust the red/green bal-
ance. “–20” is the strongest green. “+20” is the 
strongest red.

■

*1*2

`

–50 to 0 to +50

With this setting you can adjust saturation. “–50” is 
the weakest color. “+50” is the strongest color.

*1

This procedure can also be performed on the remote controller 
by using the Home menu (

26).

*2

Press CLR if you want to reset to the default value.

You can assign a default listening mode to each input 
source that will be selected automatically when you select 
each input source. For example, you can set the default lis-
tening mode to be used with Dolby Digital input signals. 
You can select other listening modes during playback, but 
the mode specified here will be resumed once the AV 
receiver has been set to Standby.

■

Analog/PCM
With this setting, you can specify the listening mode to 
be used when an analog (CD, TV, LD, VHS, MD, turn-
table, radio, cassette, cable, satellite, etc.) or PCM digi-
tal (CD, DVD, etc.) audio signal is played.

■

Mono/Multiplex Source
With this setting, you can specify the listening mode to 
be used when a mono digital audio signal is played 
(DVD, etc.).

■

2ch Source
With this setting, the default listening mode for 2-chan-
nel (2/0) stereo sources in a digital format, such as 
Dolby Digital or DTS.

■

Dolby D/Dolby D +/TrueHD
With this setting, you can specify the listening mode to 
be used when a Dolby Digital or Dolby Digital Plus for-
mat digital audio signal is played (DVD, etc.). Specifies 
the default listening mode for Dolby TrueHD sources, 
such as Blu-ray or HD DVD (input via HDMI).

q/w to select the input source that you want to 

The following menu appears.

For “TUNER” input selector only “Analog” will be 
available. For “NET/USB” input source only “Digi-
tal” will be available.

• If you connect an input component (such as UP-A1 series 

Dock that seated iPod) to the UNIVERSAL PORT jack, 
you can assign only listening modes for the analog sound 
to “PORT” selector.

q/w to select the signal format that you want 

e/r to select a listening mode.

Only listening modes that can be used with each 
input signal format can be selected (

37 to 41).

The “Last Valid” option means that the listening 
mode selected last will be used.