ONKYO TX-NR708 Manual Do Utilizador

En

■

If you set the “DHCP” setting to “Disable”, you must 
specify a gateway address.
Enter the gateway address provided by your ISP.

■

If you set the “DHCP” setting to “Disable”, you must 
specify a DNS server.
Enter the DNS server addresses provided by your ISP.

■

To use a Web proxy, enter its URL here.

■

If you’re using a Web proxy, enter a proxy port number 
here.

■

This setting enables or disables control over the network.

`

Control over the network enabled.

`

Control over the network disabled.

• When set to “Enable”, power consumption on standby mode 

slightly increases.

■

This is the network port used for control over the network.

• Set the port number between from “49152” to “65535”.

USB can be used to play music files stored on USB mass 
storage devices (e.g., USB flash drives and MP3 players), 
which can be plugged into the AV receiver’s USB port.

For USB mass storage device playback, the AV receiver 
supports music file formats.
See “Supported Audio File Formats” (

• The AV receiver supports USB devices that support the 

USB mass storage device class.

• Playback may not be possible with some USB devices 

even if they conform to the USB mass storage device 
class.

• USB devices formatted with the FAT16 or FAT32 file 

system are supported.

• If the storage device has been partitioned, each section 

will be treated as an independent device.

• Each folder may contain up to 20000 music files and 

folders, and folders may be nested up to 16 levels deep.

• USB hubs and USB devices with hub functions are not 

supported.

This section explains how to play music files on a USB 
mass storage device.

ENTER
q/w/e/r

1, 3, 2, 5, 
4, 7, 6