ONKYO TXNR828 Manual Do Utilizador

■

p-compatible TV

The following linked operations are enabled by 
connecting the AV receiver to an 

p-compatible 

TV.
• The AV receiver will enter standby mode when the 

TV is set to standby.

• You can set on the menu screen of the TV to either 

output the audio from the speakers connected to the 
AV receiver, or from the speakers of the TV.

• It is possible to output the audio coming from the 

tuner or auxiliary input of your TV to the speakers of 
the AV receiver. (A connection such as an optical 
digital cable or similar is required in addition to the 
HDMI cable.)

• Input to the AV receiver can be selected with the 

remote controller of the TV. 

• Operations such as volume adjustment or similar for 

the AV receiver can be performed from the remote 
controller of the TV.

■

p-compatible players/recorders

The following linked operations are enabled by 
connecting the AV receiver to an 

p-compatible 

player/recorder.
• When playback is started on the player/recorder, AV 

receiver will switch to the HDMI input of the 
player/recorder that is playing back.

• Operation of the player/recorder is possible using 

the remote controller supplied with the AV receiver.

*

Depending on the model used, not all operations may be 
available.

• Do not assign an HDMI IN to the TV/CD selector at this 

time, otherwise appropriate CEC (Consumer Electronics 
Control) operation will not be guaranteed.

1. Turn on the power for all connected components. 
2. Turn off the power of the TV, and confirm that the 

power of the connected components is turned off 
automatically with the link operation. 

3. Turn on the power of the Blu-ray Disc/DVD 

player/recorder. 

4. Start playback on the Blu-ray Disc/DVD 

player/recorder, and verify the following:
• The AV receiver automatically turns on, and 

selects the input to which the Blu-ray Disc/DVD 
player/recorder is connected.

• The TV automatically turns on, and selects the 

input to which the AV receiver is connected.

5. Following the operating instructions of the TV, 

select “Use the TV speakers” from the menu 
screen of the TV, and confirm that the audio is 
output from the speakers of the TV, and not from 
the speakers connected to the AV receiver.

6. Select “Use the speakers connected from the AV 

receiver” from the menu screen of the TV, and 
confirm that the audio is output from the speakers 
connected to the AV receiver, and not from the TV 
speakers.

• Audio from DVD-Audio or Super Audio CD may not output 

from the TV speakers. You will be able to output the audio 
from the TV speakers by setting the audio output of the 
DVD player to 2ch PCM. (It may not be possible depending 
on the player models.)

• Even if you set to output audio on the TV speakers, audio 

will be output from the speakers connected to the AV 
receiver when you adjust the volume or switch the input on 
the AV receiver. To output audio from the TV speakers, re-
do the corresponding operations on the TV. 

• In case of an 

p connection with u and u audio 

control compatible components, do not connect the 

u 

cable at the same time.

• On the TV, when you select anything other than the HDMI 

jack to which the AV receiver is connected, the input on the 
AV receiver will be switched to “TV/CD”.

• The AV receiver will automatically power on in conjunction 

when it determines it to be necessary. Even if the AV 
receiver is connected to an 

p compatible TV or 

player/recorder, it will not power on if it is not necessary. It 
may not power on in conjunction when the TV is set to 
output audio from the TV.

• Linked functions with the AV receiver may not work 

depending on the component model connected. In such 
cases, operate the AV receiver directly.

Connect the AV receiver between the AV 
components and the TV. The signal from the AV 
components is carried through the AV receiver. You 
can enjoy the audio of the TV through the AV 
receiver.

Video components can be connected by using any 
one of the following video connection formats: 
composite video, component video, or HDMI, the 
latter offering the best picture quality.
Video input signals flow through the AV receiver as 
shown, with composite video and component video 
sources all being upconverted for the HDMI output(s). 

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

Audio

Video, audio

Video, audio