ONKYO TXNR828 Manual Do Utilizador

You can assign a default listening mode to each input 
source that will be selected automatically when you 
select each input source. For example, you can set 
the default listening mode to be used with Dolby 
Digital input signals. You can select other listening 
modes during playback, but the mode specified here 
will be resumed once the AV receiver has been set to 
standby.

■

With this setting, you can specify the listening mode 
used when an analog (CD, TV, LD, VHS, MD, 
turntable, radio, cassette, cable, satellite, etc.) or 
PCM digital (CD, DVD, etc.) audio signal is played.

• For the “GAME2” input selector, only “PCM” is available.

■

With this setting, you can specify the listening mode 
used when a mono digital audio signal is played 
(DVD, etc.).

■

With this setting, you can specify the listening mode 
used when 2-channel (2/0) stereo digital sources, 
such as Dolby Digital or DTS, are played.

■

With this setting, you can specify the listening mode 
used when Dolby Digital or Dolby Digital Plus format 
digital audio signals are played (DVD, etc.). Specifies 
the default listening mode for Dolby TrueHD sources, 
such as Blu-ray or HD DVD (input via HDMI).

■

With this setting, you can specify the listening mode 
used when DTS or DTS-HD High Resolution format 
digital audio signals are played (DVD, LD, CD, etc.). 
Specifies the default listening mode for DTS-HD 
Master Audio sources, such as Blu-ray or HD DVD 
(input via HDMI).

■

Specifies the default listening mode for multichannel 
PCM sources from HDMI IN such as DVD-Audio, and 
DSD multichannel sources such as Super Audio CD.

■

`

Absolute:

Displayed range is Min, 0.5 to 99.5, Max.

`

Relative (THX):

Displayed range is –

QdB, –81.5dB to +18.0dB.

With this setting, you can choose how the volume level 
is displayed.
The absolute value 82 is equivalent to the relative 
value 0 dB.

• If the absolute value is set to 82, “82.0Ref” will appear on 

the display and the THX indicator will flash.

■

`

QdB (fully muted), –50dB to –10dB in 10 dB 

steps.

This setting determines how much the output is muted 
when the muting function is used (

).

■

`

Off, 50 to 99 (Absolute display)

`

Off, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

■

`

Last, Min, 1 to 99 or Max (Absolute display)

`

Last, –

QdB, –81dB to +18dB (Relative display)

With this preference, you can specify the volume 
setting to be used each time the AV receiver is turned 
on.
To use the same volume level that was used when 
the AV receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher 
than the “Maximum Volume” setting.

q/w to select the input source that you 

want to set, and then press ENTER.
The following menu appears.

q/w to select the signal format that you 

e/r to select a 

listening mode.
Only listening modes that can be used with each 
input signal format can be selected (

 

).

The “Last Valid” option means that the listening 
mode selected last will be used.
The “Straight Decode” option means that 
straight decoding listening mode (Dolby Digital, 
DTS, etc.) is selected.

• For the “TUNER” input selector, only “Analog” will be 

available.

• For the “NET” or “USB” input selector, “Digital” and 

“TrueHD” will be available.

e r

• For the “BLUETOOTH” input selector, only “Digital” 

is available.