ONKYO TX-NR5007 Manual Do Utilizador

77

With the UP-A1 Dock (sold separately), you can easily 
play the music, photo, or movie stored on your Apple 
iPod through the AV receiver and enjoy great sound. You 
can use the AV receiver’s remote controller to operate 
your iPod.

Note:
Before using the UP-A1 Dock, update your iPod with the 
latest software, available from the Apple Web site.

■ Basic Operation
Note:
The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first song.

If you start iPod playback while the AV receiver is 
on Standby, the AV receiver will automatically turn 
on and select your iPod as the input source. 

If you start iPod playback while listening to another 
input source, the AV receiver will automatically 
select your iPod as the input source.

You can use the AV receiver’s remote controller to 
control basic iPod functions.

Operating Notes:
• Functionality depends on your iPod model and gener-

ation.

• Before selecting a different input source, stop iPod 

playback to prevent the AV receiver from selecting the 
iPod input source by mistake.

• If any accessories are connected to your iPod, the AV 

receiver may not be able to select the input source 
properly.

• While your iPod is in the UP-A1 Dock, its volume 

control has no effect. If you adjust your iPod models 
volume control while it’s in the UP-A1 Dock, make 
sure it’s not set too high before you reconnect your 
headphones.

• The Auto Power On function will not work if you set 

your iPod in the UP-A1 Dock while it is playing.

• When Zone 2 or 3 is turned on, you can’t use Auto 

Power On and Direct Change functions.

■ Using Your iPod models Alarm Clock
You can use your iPod models Alarm Clock function to 
automatically turn on your iPod and the AV receiver at a 
specified time. The AV receiver’s input source will auto-
matically be set to the [PORT] selector.

Notes:
• To use this function, your iPod must be in the UP-A1 

Dock, and the UP-A1 Dock must be connected to the 
AV receiver.

• When you use this function, be sure to set the AV 

receiver’s volume control to a suitable level.

• The AV receiver may take several seconds to startup, 

so you might not hear the first few seconds of the first 
song.

• When Zone 2 or 3 is turned on, you can’t use this func-

tion.

• You cannot use this function for sound effects on your 

iPod.

■ Charging Your iPod models Battery
The UP-A1 Dock charges your iPod models battery 
while your iPod is in the UP-A1 Dock and connected to 
the UNIVERSAL PORT jacks on the AV receiver. While 
your iPod is seated in the UP-A1 Dock, its battery will 
be charged when the AV receiver is set to “On” or 
“Standby”.

Note:
When UP-A1 Dock that seated iPod is connected, the 
power consumption on standby mode slightly increases.

For the latest information on the Dock, see the Onkyo 
Web site at: http://www.onkyo.com