ONKYO TX-SA706 Manual Do Utilizador
44
If you connect a component to a digital input jack, you
must assign that jack to an input selector. For example, if
you connect your CD player to the OPTICAL IN1 jack,
you should assign that jack to the CD input selector. By
default, the COAXIAL IN1 jack is assigned to the DVD
input selector, although this can be changed.
Here are the default assignments.
must assign that jack to an input selector. For example, if
you connect your CD player to the OPTICAL IN1 jack,
you should assign that jack to the CD input selector. By
default, the COAXIAL IN1 jack is assigned to the DVD
input selector, although this can be changed.
Here are the default assignments.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Digital Input Setup
Input selector
Default assignment
DVD
COAX1
VCR/DVR
COAX2
CBL/SAT
COAX3
GAME/TV
OPT1
AUX
FRONT
TAPE
- - - - -
TUNER
(TX-SA706 only)
- - - - -
CD
OPT2
PHONO
- - - - -
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [
q]/[w] but-
tons to select “1. Input Assign”,
and then press [ENTER].
The “Input Assign” menu appears.
and then press [ENTER].
The “Input Assign” menu appears.
3
Use the Up and Down [
q]/[w] but-
tons to select “3. Digital Audio
Input”, and then press [ENTER].
The “Digital Audio Input” menu
appears.
Input”, and then press [ENTER].
The “Digital Audio Input” menu
appears.
1. Input
Assign
1. HDMI
Input
2. Component
Video
Input
3. Digital Audio Input
1–3. Digital Audio Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
PHONO
PHONO
COAX 1
COAX 2
COAX 3
COAX 2
COAX 3
OPT 1
FRONT
- - - - -
- - - - -
OPT 2
- - - - -
4
Use the Up and Down [
q]/[w] but-
tons to select an input selector,
and use the Left and Right [
and use the Left and Right [
e]/
[
r] buttons to select “COAX1”,
“COAX2”, “COAX3”, “OPT1”,
“OPT2”, or “- - - - - (analog)”.
• When an HDMI IN is assigned to an
“OPT2”, or “- - - - - (analog)”.
• When an HDMI IN is assigned to an
input selector in “HDMI Input
Setup” on page 42, this input assign-
ment is automatically set to the same
HDMI IN. And in addition to the
usual inputs (e.g., COAX1, COAX2,
etc.), you can also select HDMI
inputs. If you change the input
assignment from an HDMI IN to one
of the other inputs (e.g., COAX1 or
COAX2), be sure to set the “Auto-
matic Audio Input Selection Setup”
on page 96 to the same input (e.g.,
COAX1 (Auto) or COAX2 (Auto)).
Setup” on page 42, this input assign-
ment is automatically set to the same
HDMI IN. And in addition to the
usual inputs (e.g., COAX1, COAX2,
etc.), you can also select HDMI
inputs. If you change the input
assignment from an HDMI IN to one
of the other inputs (e.g., COAX1 or
COAX2), be sure to set the “Auto-
matic Audio Input Selection Setup”
on page 96 to the same input (e.g.,
COAX1 (Auto) or COAX2 (Auto)).
• “AUX” is used only for digital input
from the front panel terminals. When
HDMI IN is assigned to “AUX” in
the “HDMI Input Setup” on page 42,
the same HDMI IN can be selected.
HDMI IN is assigned to “AUX” in
the “HDMI Input Setup” on page 42,
the same HDMI IN can be selected.
Examples:
If you connect your DVD player to the
OPTICAL IN 1 jack, set “DVD” to
“OPT1”.
If you want to listen to audio from the
component connected to the OPTICAL
IN 2 jack when the VCR/DVR input
selector is selected, set “VCR/DVR” to
“OPT2”.
If you want to listen to audio from the
component connected to the COAX-
IAL IN 1 jack when the CBL/SAT
input selector is selected, set “CBL/
SAT” to “COAX1”.
For input selectors that you don’t want
to assign a digital input jack, set to
“- - - - - (analog)”.
If you connect your DVD player to the
OPTICAL IN 1 jack, set “DVD” to
“OPT1”.
If you want to listen to audio from the
component connected to the OPTICAL
IN 2 jack when the VCR/DVR input
selector is selected, set “VCR/DVR” to
“OPT2”.
If you want to listen to audio from the
component connected to the COAX-
IAL IN 1 jack when the CBL/SAT
input selector is selected, set “CBL/
SAT” to “COAX1”.
For input selectors that you don’t want
to assign a digital input jack, set to
“- - - - - (analog)”.
5
Press the [SETUP] button.
The setup menu closes.
The setup menu closes.