ONKYO TX-SA706 Manual Do Utilizador

89

This section explains the items on the “Miscellaneous” 
menu. 

Note:
This procedure can also be performed on the AV 
receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button.

■ Volume Display
With this setting, you can choose how the volume level 
is displayed.

The absolute value 82 is equivalent to the relative value 
0 dB.

■ Muting Level
This setting determines how much the output is muted 
when the Muting function is used (see page 56). It can be 
set to – 

∞

 dB (fully muted) or from –50 dB to –10 dB in 

10 dB steps.

■ Maximum Volume
With this setting, you can limit the maximum volume.
When the “Volume Display” setting is set to “Absolute”, 
the Maximum Volume range is “Off”, 50 to 99.
When it’s set to “Relative”, the range is “Off”, –32 dB to 
+17 dB. To disable this setting, select “Off”.

■ PowerOn Volume
With this preference, you can specify the volume setting 
to be used each time the AV receiver/AV amplifier is 
turned on.
When the “Volume Display” preference is set to “Abso-
lute”, the range is “Last”, “Min”, 1 to 99 or “Max”. 
When it’s set to “Relative”, the range is “Last”, – 

∞

 dB, 

–81 dB to +18 dB. 
To use the same volume level that was used when the AV 
receiver/AV amplifier was turned off, select “Last”.
The “PowerOn Volume” cannot be set higher than the 
“Maximum Volume” setting.

■ Headphone Level
With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there’s 
a volume difference between your speakers and your 
headphones. The headphones level can be set from –12 
dB to +12 dB. 

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “6. Miscellaneous”, 
and then press [ENTER].
The “Miscellaneous” menu appears.

q]/[w] but-

tons to select an item, and then 
press [ENTER].
The screen for that item appears.

q]/[w] but-

e]/[r] but-

tons to change it.
The items are explained below.

When you’ve finished, press the 
[SETUP] button.
The setup menu closes.

Absolute: Display range is “Min”, 0.5 through 99.5, 

“Max”.

Display range is – 

∞

 dB, –81.5 dB through 

+18.0 dB.