ONKYO TX-SR875 Manual Do Utilizador

Página de 120
 
79
 
Recording
 
This section explains how to record the input source and 
how to record audio and video from separate sources.
 
Notes:
 
• The surround sound and DSP listening modes cannot 
be recorded.
• Copy-protected DVDs cannot be recorded.
• Sources connected to the analog multichannel input 
cannot be recorded.
• Various restrictions apply to digital recording. Refer to 
the manuals supplied with your digital recording 
equipment for more details.
• Digital input signals are output by only the digital out-
puts, and analog input signals are output by only the 
analog outputs. There is no internal conversion from 
digital to analog or vice versa.
• DTS signals will be recorded as noise, so don’t 
attempt analog recording of DTS CDs or LDs.
• While the Pure Audio listening mode is selected, the 
VCR/DVR OUT V and S jacks don’t output video sig-
nals, so select another mode when recording.
Audio sources can be recorded to a recorder (e.g., cas-
sette deck, CDR, MD) connected to the TAPE OUT or 
DIGITAL OPTICAL OUT jacks. Video sources can be 
recorded to a video recorder (e.g., VCR, DVR) con-
nected to the VCR/DVR OUT jacks. See pages 27 to 43 
for hookup information.
 
Note:
 
• If you select a different input source during recording, 
that input source will be recorded instead.
You can overdub audio onto your video recordings by 
simultaneously recording audio and video from two sep-
arate sources. This is possible because only the audio 
source is switched when an audio-only input source, 
such as TAPE, TUNER, or CD, is selected, the video 
source remains the same.
In the following example, audio from the CD player con-
nected to the CD IN and video from the camcorder con-
nected to the AUX 2 INPUT VIDEO jack are recorded 
by the VCR connected to the VCR/DVR OUT jacks.
 
Recording the Input Source
 
1
 
Use the input selector buttons to 
select the source that you want 
to record.
 
You can watch the source while record-
ing it. The AV receiver’s MASTER 
VOLUME control has no effect on 
recording.
 
2
 
On your recorder, start record-
ing.
 
3
 
On the source component, start 
playback.
CD
TUNER
TAPE
CBL/SAT
GAME/TV
AUX 1
AUX 2
VCR/DVR
DVD
PHONO
Remote
controller
DVD
AUX
1
AUX
2
GAME/TV
CBL/SAT
VCR/DVR
CD
TUNER
TAPE
PHONO
+10
1
2
3
4
5
6
7
8
9
 
Recording from Different AV Sources
 
1
 
Prepare the camcorder and CD player for 
playback.
 
2
 
Prepare the VCR for recording.
 
3
 
Press the [AUX 2] input selector button.
 
4
 
Press the [CD] input selector button.
 
This selects the CD player as the audio source but 
leaves the camcorder as the video source.
 
5
 
Start recording on the VCR, then start 
playback on the camcorder and CD player.
 
Video from the camcorder and audio from the CD 
player are recorded by the VCR.
RS232
DIGITAL
COAXIAL
OPTICAL
REMOTE
CONTROL
IN 1
IN 1
IN 2
IN
IN
IN
IN
PHONO
ZONE2 R
FRONT R
FRONT R (BTL)
SURR R
CENTER
SURR L
SURR BACK R
CD
TAPE
AUX 1
GAME/TV
GAME/TV CBL/SAT
CBL/SAT
AUX 1
VCR/DVR
VCR/DVR
DVD
DVD
IR
IN
GND
IN 2
IN 3
L
L
V
V
S
S
R
R
ASSIGNABLE
(DVD)
(CBL/SAT)
(VCR/DVR)
(GAME/TV)
(CD)
OUT
HDMI
IN 1
IN 2
IN 3
IN 4
ASSIGNABLE
OUT
COMPONENT VIDEO
ASSIGNABLE
IN 3
Y
CB/PB
CR/PR
IN 2
IN 1(DVD) MONITOR
OUT
OUT
IN
IN
OUT
IN
IN
FRONT
CENTER
SUBWOOFER
SURR
MULTI CH
SURR BACK
MONITOR
OUT
AM
ANTENNA
FM75
OUT
Bi-AMP
ZONE 2
OUT
PUSH TO OPEN
VIDEO
S VIDEO
DIGITAL
AUX 2 INPUT
AUDIO
L
R
Camcorder
VCR
CD player
video signal
audio signal
TX-SR805_875_En.book Page 79 Thursday, April 26, 2007 3:00 PM