ONKYO SKB-960 Manual Do Utilizador

 

52

 

7

 

For private listening, you can connect a pair of stereo 
headphones (1/4-inch phone plug) to the AV receiver’s 
PHONES jack.

 

• Always turn down the volume before connecting your 

headphones.

• While the headphones plug is inserted in the PHONES 

jack, speakers sets A and B are turned off.

• When you connect a pair of headphones, the listening 

mode is set to Stereo, unless it was already set to 
Mono, Stereo, or Direct, in which case it stays the 
same.

• When the multichannel DVD input is selected, only 

the front left and front right channels can be heard in 
the headphones.

You can display various information about the current 
input source as follows.

 

• This procedure can also be performed on the AV 

receiver by using its [DISPLAY] button.

The following information can typically be displayed:

*1 When AM or FM radio is used, the band, preset num-

ber, and frequency are displayed.

*2 If the input signal is analog, or AM or FM radio is 

selected, no format information is displayed. If the 
input signal is PCM, the sampling frequency is dis-
played. If the input signal is digital but not PCM, the 
signal format is displayed. Information is displayed 
for about 3 seconds, then the previous display reap-
pears.

ON/STANDBY

STANDBY

A    SPEAKERS   B

PHONES

MULTI CH

THX

HT-S9100THX_En.book Page 52 Friday, June 27, 2008 4:00 PM