ONKYO SKB-960 Manual Do Utilizador

 

89

 

■

 

Some DVD players output the LFE channel from their 
analog subwoofer output at 15 dB higher than normal. 
With this setting, you can change the AV receiver’s sub-
woofer sensitivity to match your DVD player. Note that 
this setting only affects signals connected to the AV 
receiver’s DVD SUBWOOFER jack.

You can select 0dB (default), 5dB, 10dB, or 15dB.

If you find that your subwoofer is too loud, try the 10 dB 
or 15 dB setting.

 

■

 

You can specify the output resolution for the HDMI 
OUT and have the AV receiver upscale the picture reso-
lution as necessary to match the resolution supported by 
your TV.

See the “Video Resolution Chart” on page 107 to see 
how the AV receiver handles video input at different res-
olutions.

 

Select this to pass video through the AV 

receiver at its original resolution and with no 
scaling.

 

Select this to have the AV receiver automati-
cally scale video at resolutions not supported 
by your TV.

 

Select this for 480p or 576p output and video 
scaling as necessary.

 

Select this for 720p output and video scaling as 
necessary.

 

Select this for 1080i output and video scaling 
as necessary.

 

■

 

With the Zoom mode setting, you can choose whether 
480i, 480p, 576i, and 576p input signals are resized 
before they are output by the HDMI OUT. This setting 
only applies when the HDMI Output Resolution setting 
is set to 1080i or 720p.

 

 Select this to display the picture at its original 

size.

 

 Select this to resize the picture so that it fills the 

entire screen.

 

The Remote indicator flashes twice.

(3 seconds)

HT-S9100THX_En.book Page 89 Friday, June 27, 2008 4:00 PM