ONKYO TX-SR 803E Manual Do Utilizador

 

37

 

Digital video signals received at HDMI 
IN 1 and 2 are only output by the HDMI 
OUT and sent to your TV. Composite 
video, S-Video, and component video 
input signals are not output by the HDMI 
OUT.

 

• The onscreen setup menus are not output by the HDMI OUT, so you’ll also need to make a composite video, S-Video, 

or component video connection to your TV (see page 26).

 

Digital audio signals received at HDMI 
IN 1 or 2 are output by the speakers and 
headphones connected to the AV receiver. 
They’re also output by the OPTICAL 
OUT and can be output by the HDMI 
OUT by setting the HDMI Audio Out set-
ting to On (see page 79).

 

*

 

 To listen to audio received at HDMI IN 1 and 2, through your TV’s speakers, set the HDMI Audio Out setting to On 

(see page 79). Note that some audio (e.g., DVD-Audio) may not be output by your TV. Also, audio formats and sampling 
rates not supported by your TV may not be output. Be sure to configure your DVD player’s output settings appropriately.

Step 1: Use HDMI cables to connect the TX-SR803/803E’s HDMI jacks to your HDMI-compatible DVD player, 
TV, projector, and so on.

Step 2: Assign each HDMI IN to an input selector in the HDMI Video setup (see page 43).

Composite

Composite

S-Video

S-Video

Component

Component

HDMI

HDMI

HDMI

HDMI

Optical

Optical

Coaxial

Analog

Analog

*

TX-SR803_En.book Page 37 Friday, August 26, 2005 9:26 AM