ONKYO TX-NR801 Manual Do Utilizador

32

Selecting the Appropriate Setting for Your Connections—Continued

After you have installed the TX-NR801/TX-NR801E, 
connected all the components, and determined the 
speaker layout, it is now time to perform the settings in 
the Speaker Setup Menu to optimize the sound acoustics 
for your environment and speaker layout.
Before you perform the following settings, it is 
important that you first determine the following items:
• The types and sizes of the speakers that are connected.
• The distance from each speaker to the normal 

listening position.

Note:
When “Large” is set, the complete frequency range for 
that speaker channel will be output. When “Small” is set, 
the frequencies below 80 Hz for that speaker channel are 
output to the subwoofer. If there is no subwoofer, then 

they will be output to the left and right front speakers. 
(Set all speakers for THX speaker systems to “small.”)
If you want to perform these operations using the remote 
controller, first press the RCVR button.

DSP

A-FO RM LISTENING MODE MEMORY

THX

SURROUND

DIRECT / PURE AUDIO

STEREO

FM MODE

MEMORY

ENTER

RE TURN

SETUP

TUNING

PRESET

   [ENTER]Quit:[SETUP] 

  Basic Menu

 0.Hardware Setup
 1.Speaker Setup
 2.Input Setup
 3.Audio Adjust

          

→Advanced Menu

1.Speaker Setup
 

 1.Speaker Config 
 
 2.Speaker Distance
 
 3.Level Calibration   

[ENTER]Quit:[SETUP]

Display the main menu.
Press the SETUP button on the front panel or 
SETUP button on the remote controller to display 
the main menu on the monitor and front display.

“1. Speaker Setup” and then press the 
ENTER button. 
The “Speaker Setup” menu appears.

an item and then use the 

 and 

Press the SETUP button to exit the Setup 
menu.
Press the RETURN button to return to the previ-
ous menu.