ONKYO TX-NR801 Manual Do Utilizador

 

46

 

One of the features of the TX-NR801/TX-NR801E that 
is most frequently used is its ability to play FM and AM 
broadcast radio stations. The TX-NR801/TX-NR801E 
provides a number of listening modes perfect for listen-
ing to the radio and getting the most out of your audio 
system. Also, by presetting radio stations that you listen 
to frequently, you can select them easily by pressing the 
CH 

 button on the remote controller.

• The tuner frequency changes in 100 kHz (50 kHz) 

increments for FM and 10 kHz (or 9 kHz) increments 
for AM.

• You can press the TUNING 

 or 

 button continu-

ously for more than 0.5 seconds to scan for an FM sta-
tion in the direction of the button you pressed (FM 
auto tuning mode). After you release the button and a 
station is received in stereo, the scanning stops.

• The European model allows you to receive RDS 

broadcasts. See pages 48 and 49 for more information 
regarding tuning into RDS broadcasts.

 

When you tune into a radio station, 

 

TUNED 

 

indicator appears in the dis-

play. If you tune into an FM station in ste-
reo, then “FM STEREO” appears. If the 
signal is weak, it may be impossible to tune 
into the station in stereo. In such a case, 

 

 on the front 

panel. The AUTO indication disappears 
and the radio station is output in the mon-
aural mode. To return to stereo, press the 
FM MODE button again. “AUTO” appears. 
Some inter-station noise may be heard, but 
the sound will not cut in and out as it would 
if stereo was selected.

DSP

A-FO RM LISTENING MODE MEMORY

THX

SURROUND

DIRECT / PURE AUDIO

STEREO

FM MODE

MEMORY

ENTER

RE TURN

SETUP

TUNING

PRESET

 

Each time you press the TUNER button, 
the input source changes between AM 
and FM.

TUNER

TUNING

PRESET

FM MODE