ONKYO TX-NR801 Manual Do Utilizador
51
Recording a Source—Continued
You can add the sound from one source to the video of
another source to make your own video recordings.
Below is an example of recording the sound from a com-
pact disc player connected to CD IN and the video from
a video camera connected to VIDEO 5 INPUT to video
cassette tape in a video cassette recorder connected to
the VIDEO 1 OUT jack.
The illustrations used here represent the TX-NR801/
TX-NR801E.
another source to make your own video recordings.
Below is an example of recording the sound from a com-
pact disc player connected to CD IN and the video from
a video camera connected to VIDEO 5 INPUT to video
cassette tape in a video cassette recorder connected to
the VIDEO 1 OUT jack.
The illustrations used here represent the TX-NR801/
TX-NR801E.
Notes:
• If you change the input source during recording, you
• If you change the input source during recording, you
will record the audio signals from the newly selected
input source and the video signals assigned to that
input source.
input source and the video signals assigned to that
input source.
• You cannot record the surround effects.
Recording the Video from One
Source and the Audio from Another
Source and the Audio from Another
1
Press the CD input source button.
2
Set “VIDEO 5” for the Video setting
in the Video Setup sub-menu of
the Setup menu: Input Setup
in the Video Setup sub-menu of
the Setup menu: Input Setup
→
Video Setup
→ Video.
3
Insert a CD in the CD player and
insert a tape in the video camera
connected to the VIDEO 5 INPUT.
insert a tape in the video camera
connected to the VIDEO 5 INPUT.
4
Insert a video tape for recording in
the video cassette recorder con-
nected to VIDEO 1 OUT.
the video cassette recorder con-
nected to VIDEO 1 OUT.
5
Press the REC OUT button repeat-
edly until “Rec Sel:SOURCE”
appears in the front display.
Now “CD” has been selected as the audio
input source and “VIDEO 5” as the video
input source.
edly until “Rec Sel:SOURCE”
appears in the front display.
Now “CD” has been selected as the audio
input source and “VIDEO 5” as the video
input source.
6
Start recording on the video cas-
sette recorder and start playing at
the CD player and video camera as
desired.
sette recorder and start playing at
the CD player and video camera as
desired.
ENTER
RE TURN
SETUP
Basic Menu
2.Input Setup
2-3.Video Setup
a.Video
a.Video
:VIDEO5
b.Component Video
:INPUT1
:INPUT1
Quit:[SETUP]
Input:CD
Input:CD