ONKYO HT-R518 Manual Do Utilizador
59
Advanced Setup
This section explains how to check the speaker settings
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 34).
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 34).
Speaker Configuration
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
Large
(full band)
.
For those
with a smaller diameter, specify
Small
(default crossover 100Hz)
.
The crossover frequency can be
changed on page 60.
changed on page 60.
Speaker Setup
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
2
Use the Up and Down [
]/[
]
buttons to select “Sp Config,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
For the HT-S5105 Home Theater System Cos-
tomer
tomer
Speaker Configuration, Crossover Frequency,
and Double Bass settings only need to be
changed if you’re not using the speakers in
this package.
These settings cannot be changed while head-
phones are connected, speaker set B is on, or
the multichannel DVD input is being used.
and Double Bass settings only need to be
changed if you’re not using the speakers in
this package.
These settings cannot be changed while head-
phones are connected, speaker set B is on, or
the multichannel DVD input is being used.
These settings are set automatically by the Automatic
Speaker Setup function (see page 34).
Speaker Setup function (see page 34).
Cone diameter
3
While the “Subwoofer” setting is
selected, use the Left and Right
[
selected, use the Left and Right
[
]/[
] buttons to select
Yes
or
No
.
Yes:
Select if a subwoofer is con-
nected.
nected.
No:
Select if no subwoofer is con-
nected.
nected.
4
Use the Down [
] button to
select “Front,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
or
Large
.
Small:
Select if the front speakers are
small.
small.
Large:
Select if the front speakers are
large.
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
and does not appear.
5
Use the Down [
] button to
select “Center,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the center speaker is
small.
small.
Large:
Select if the center speaker is
large.
large.
None:
Select if no center speaker is
connected.
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
6
Use the Down [
] button to
select “Surround,” and then use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
Small
,
Large
, or
None
.
Small:
Select if the surround speak-
ers are small.
ers are small.
Large:
Select if the surround speak-
ers are large.
ers are large.
None:
Select if no surround speakers
are connected.
are connected.
HT-R518_En.book Page 59 Tuesday, March 11, 2008 11:31 AM