ONKYO TXNR727 Manual Do Utilizador

Please connect 

a , b , c , d , e and f for 5.1-channel surround.

• Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) 

terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the 
sound will be out of phase and will sound unnatural.

Surround 

speaker R 

e

Surround 

speaker L 

d

Surround back or 

Front high speaker L

G I

Powered 

subwoofer 

f

Gray

a

Front

speaker L

b

Front

speaker R

Green

White

Red

c

Center speaker

If you’re using only one surround back 
speaker, connect it to the SURROUND 
BACK or FRONT HIGH L terminals.

Surround back or 

Front high speaker R

H J

Powered 

subwoofer 

f

Tan

Brown

Blue

• Read the instructions supplied with your speakers.
• By default, speakers for 7.1-channel surround are 

configured to use: front right/front left/center/
surround right/surround left/surround back right/
surround back left/subwoofer.

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the 
ends of the speaker cables, and twist the bare wires 
tightly, as shown.

■

• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the 

center hole of the speaker terminal.

Before connecting the power cord, connect all of 
your speakers and AV components. A setup wizard 
is launched upon first-time use to let you perform 
the settings.

1/2" to 5/8" (12 to 15 mm)