ONKYO TXNR727 Manual Do Utilizador

By pressing the REMOTE MODE button that’s been 
programmed with the remote control code for your 
component, you can control your component as 
described below.
For details on entering a remote control code for other 
components, see “Entering Remote Control Codes” 
(

TV is preprogrammed with the remote control code 
for controlling a TV that supports the 

 

(limited to some models). The TV must be able to 
receive remote control commands via 

p and 

be connected to the AV receiver via HDMI. If 
controlling your TV via 

p doesn’t work very 

well, program your TV’s remote control code into TV 
and use the TV remote mode to control your TV.
Use the following remote control codes:

`

11807/13100/13500:

TV with 

p

By programming the supplied remote controller with 
the appropriate remote control code, you can use it to 
operate your Apple TV.
Use the following remote control codes:

`

02615:

Apple TV

By programming the supplied remote controller with 
the appropriate remote control code, you can use it to 
operate your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX 
INPUT MHL jack. We advise you to program the 
remote control code on the AUX button.
Use the following remote control codes:
(North American and Taiwanese models)

`

33101:

MHL-enabled mobile device

`

32910:

MHL-enabled mobile device

• With some mobile devices, reliable operation cannot be 

guaranteed.

BD/DVD is preprogrammed with the remote control 
code for controlling a component that supports the 
p

 (limited to some models). The component 

must be able to receive remote control commands via 
p and be connected to the AV receiver via 
HDMI.
Use the following remote control codes:

`

32910/33101/33501/31612:

Blu-ray Disc/DVD player with 

p

*1

The 

p supported by the AV receiver is the CEC 

system control function of the HDMI standard.

h

l

m

n

o

k

j

g

c

b

d

a

e

f

i

Press the appropriate REMOTE 
MODE button first.