ONKYO HT-R510 Manual Do Utilizador

19

With 

 (Remote Interactive) you can control your 

-

compatible Onkyo CD player, DVD player, or cassette 
recorder with the HT-R510’s remote controller, and use the 
following special 

 functions:

■ Auto Power On

When you turn on an AV component connected via 

 while 

the HT-R510 is in Standby, the HT-R510 automatically turns 
on and selects that AV component as the input source.

This function will not work if the AV component’s power 
cord is connected to the HT-R510’s AC OUTLET, or if the 
HT-R510 is already on.

■ Auto Source Select

When you press the play button on an AV component con-
nected via 

, the HT-R510 automatically selects that AV 

component as the input source.

■ Auto Power Off

When you set the HT-R510 to Standby, all AV components 
connected via 

 also enter Standby.

See page 41 for information on using the remote controller to 
control the other functions of your 

-compatible AV com-

ponents.

To use 

, you need to connect the HT-R510’s 

 connector to the 

 connector on the other AV component with an 

 

cable. An 

 cable is supplied with each 

-compatible CD player, DVD player, and cassette recorder.

Notes:
• Push the plugs in all the way to make a good connection.

• Use only 

 cables for 

 connections.

• If an AV component has two 

 connectors, you can con-

nect either one to the HT-R510. The other connector is for 
connecting additional 

-compatible components.

• Connect the HT-R510’s 

 connector to only Onkyo AV 

components. Connecting to other manufacturer’s AV com-
ponents may cause them to malfunction.

• Some Onkyo 

-compatible AV components may not 

support the special functions described above.