ONKYO HT-R510 Manual Do Utilizador

Using the Remote Controller RC-518M with Your Other AV
Components

Connecting your

-compatible Onkyo CD player, DVD

player, or cassette recorder to the HT-R510 via

allows

you to control your system with the HT-R510’s remote con-
troller by pointing it at the HT-R510. This allows you to con-
trol components that are out of sight, for example, in a
cabinet. Since you don’t have to enter any special codes, or
do any programming,

allows you to control these compo-

nents quickly and easily. See page 19 for connection infor-
mation. See page 41 for operating information.

In addition, you can control an AV component made by
another manufacturer by entering the appropriate manufac-
turer’s code into the remote controller.

Note:
• To use the

function, you must make an

connection

and an analog RCA/phono connection between the AV
component and your HT-R510, even if they are connected
digitally.

Entering the Manufacturer’s Code

If you’re using an Onkyo CD player connected to the
HT-R510’s

connector, an Onkyo AV component without

connection, or an AV component made by another

manufacturer, do the following.

If it works as expected, the code has been entered correctly.
If not, go back to step 3 and try again.
Note that with some manufacturer’s AV components, some
of the remote controller’s buttons may not work as expected.

By default, the [CD/DVD] button is set to code 316,
which is for use with an

-compatible Onkyo DVD

player connected to the HT-R510’s

connector. To

control an

-compatible Onkyo CD player connected

to the HT-R510’s

connector, you must enter code

300. To control an Onkyo DVD player without an

connection, you must enter either code 301 or 313. The
[CD/DVD] button can be used with only one AV compo-
nent.

RC-518M

Determine the appropriate manufacturer’s
code from the following list.

Where several codes are listed, try the first one, and
if that doesn’t work, try the others until you find one
that does.

While holding down the remote controller’s
[VCR], [TV], [CABLE/SAT], or [CD/DVD] but-
ton, press the [ENT] button.

For the [CD/DVD] button, you can enter a CD code
or DVD code, not both. And for the [CABLE/SAT]
button, a Cable code or Satellite code, not both.

Within 10 seconds, use the remote control-
ler’s number buttons to enter the manufac-
turer’s code.

Check to see if you can control the AV com-
ponent from the remote controller.

Manufacturer

VCR

DVD

Cable

Satellite

AIWA

137

AKAI

227

DENON

302

ECHOSTAR

500

EMERSON

228

FISHER

200

100, 101, 102,

140

103, 104

GE • PANA

201, 202

GE • RCA

203

GEMINI

401

GENERAL
INSTRUMENT

501

G.I.

400

GO VIDEO

105, 106, 107

GOLD STAR

204, 205

108

HAMLIN

402, 403, 404,

405

HITACHI

206, 207

103, 109

303

502

HUGHES
NETWORK
SYSTEM

503

JERROLD

406, 407, 408,
409, 410, 411,

412, 413, 414

JVC

208

110, 111, 112,

113

304

KENWOOD

305

MACOM

415, 416, 417

MAGNAVOX

209, 210

114, 115, 116

306

418

MARANTZ

211

307

MITSUBISHI

117, 118, 119,

120, 121, 139

308

NEC

136

OAK

419, 420, 421

ONKYO

301, 313,

316 (for

DVD),

300 (for CD)

PANASONIC

212, 213

122, 123

309

422, 423

504, 505, 506

PHILIPS

214

114

424, 425, 426,

427, 428, 429

PIONEER

215

310

430, 431

PRIMESTAR

507

PROSCAN

216

311

508, 509, 510

RCA

217, 218, 219,

220, 229, 230

109

311

508, 509, 510

S.ATLANTA

432, 433, 434

SAMSUNG

221, 222

124, 125, 126

304

435

SHARP

223

127, 128

SHINTOM

138

SONY

224

129, 130, 131,

132, 133, 141

312

511

TOCOM

436

TOSHIBA

134

313

512

YAMAHA

314

ZENITH

225, 226

135

315

437, 438