ONKYO HT-RC370 Manual Do Utilizador

En

■

You can tune into AM and FM stations directly by 
entering the appropriate frequency.

You can store a combination of up to 40 of your favorite 
AM/FM radio stations as presets.

• You can name your radio presets for easy identification 

page 53). Its name is displayed instead of the band and 

frequency.

■

■

When tuned into an RDS station, the RDS indicator lights.
When the station is broadcasting text information, the text 
can be displayed.

■

RDS stands for Radio Data System and is a method of 
transmitting data in FM radio signals. It was developed by 
the European Broadcasting Union (EBU) and is available 
in most European countries. Many FM stations use it these 
days. In addition to displaying text information, RDS can 
also help you find radio stations by type (e.g., news, sport, 
rock, etc.).

The AV receiver supports four types of RDS information:
PS (Program Service)
When tuned to an RDS station that’s broadcasting PS 
information, the station’s name will be displayed. Pressing 
DISPLAY will display the frequency for 3 seconds.
RT (Radio Text)
When tuned to an RDS station that’s broadcasting text 
information, the text will be shown on the display as 
described in the next section. 
PTY (Program Type)
This allows you to search for RDS radio stations by type 
(

page 30). 

TP (Traffic Program)
This allows you to search for RDS radio stations that 
broadcast traffic information (

• In some cases, the text characters displayed on the AV receiver 

may not be identical to those broadcast by the radio station. Also, 
unexpected characters may be displayed when unsupported 
characters are received. This is not a malfunction.

• If the signal from an RDS station is weak, RDS data may be 

displayed intermittently or not at all.

(Actual display depends on the country.)

Within 8 seconds, use the number buttons to enter 
the frequency of the radio station.
For example, to tune to 87.5 (FM), press 8, 7, 5.
If you have entered the wrong number, you can retry 
after 8 seconds.

Tune into the AM/FM station that you want to 
store as a preset.
See the previous section.

The preset number flashes.

(Actual display depends on the country.)

e/r to select a preset from 

channel.
The station or channel is stored and the preset number 
stops flashing.
Repeat this procedure for all of your favorite AM/FM 
radio stations.

e/r on the AV 

• You can also use the remote controller’s number buttons to 

select a preset directly.

Select the preset that you want to delete.
See the previous section.

MODE.
The preset is deleted and its number disappears from 
the display.