Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. HT-RC370
  5. Manual Do Utilizador

ONKYO HT-RC370 Manual Do Utilizador

Download
Página de 92
67
En
Controlling Other Components
You can use the AV receiver’s remote controller to 
control your other AV components, including those made 
by other manufacturers. This section explains how to enter 
the remote control code for a component that you want to 
control: DVD, TV, CD, etc.
“Learning Commands” for learning commands directly 
from another component’s remote controller 
(
“Using Normal Macros” for programing ACTIVITIES
to perform a sequence of remote control actions 
(
The following REMOTE MODE buttons are 
preprogrammed with remote control codes for controlling 
the components listed. You do not need to enter a remote 
control code to control these components.
For details on controlling these components, see the 
indicated pages.
You can look up for an appropriate remote control code 
from the on-screen setup menu.
Note
• This can only be carried out using the on-screen setup menu.
You’ll need to enter a code for each component that you 
want to control.
Note
• Though the provided remote control codes are correct at the time 
of printing, they are subject to change.
Preprogrammed Remote Control 
Codes
BD/DVD
Onkyo Blu-ray Disc player (
TV/CD
Onkyo CD player (
PORT
Onkyo Universal Port Option (
Looking up for Remote Control Code
1
Press 
RECEIVER followed by SETUP.
The main menu appears on-screen.
Tip
• If the main menu doesn’t appear, make sure the appropriate 
external input is selected on your TV.
2
Use 
q/w to select “Remote Controller Setup”, and 
then press 
ENTER.
3
Use 
q/w to select “Remote Mode Setup”, and then 
press 
ENTER.
4
Use 
q/w to select a remote mode, and then press 
ENTER.
The menu of category selection appears.
5
Use 
q/w to select a category, and then press 
ENTER.
The panel for brand name input appears.
6
Use 
q/w/e/r to select a character, and then press 
ENTER.
Repeat this step for the first three characters of the 
brand name.
When you have entered the 3rd character, select 
“Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use 
r to select “Not Listed”, and then press 
ENTER.
The panel for brand name input appears.
7
Use 
q/w to select a brand, and then press ENTER.
A remote control code with its instructions are 
displayed. Follow the procedure.
8
If you can control the component, use 
q/w to select 
“OK”, and then press 
ENTER.
The “Remote Mode Setup” menu appears.
If you cannot control the component, use 
q/w to 
select “Try next code” and press 
ENTER.
The next code is displayed.
Entering Remote Control Codes
1
Look up the appropriate remote control code in the 
separate Remote Control Codes list.
The codes are organized by category (e.g., DVD 
player, TV, etc.).
2
While holding down the 
REMOTE MODE to 
which you want to assign a code, press and hold 
down 
DISPLAY (about 3 seconds).
The REMOTE MODE button lights.
Note
• Remote control codes cannot be entered for RECEIVER 
and ZONE 2.
• Only TV remote control codes can be entered for TV.
• Except for RECEIVER, TV and ZONE 2, remote control 
codes from any category can be assigned to the REMOTE 
MODE. However, these buttons also work as input selector 
buttons (
page 23), so choose a REMOTE MODE that 
corresponds with the input to which you connect your 
component. For example, if you connect your CD player to 
the CD input, choose TV/CD when entering its remote 
control code.
3
Within 30 seconds, use the number buttons to enter 
the 5-digit remote control code.
REMOTE MODE button flashes twice.
If the remote control code is not entered successfully, 
REMOTE MODE button will flash once slowly.