ONKYO HT-R391 Manual Do Utilizador

Items can be set individually for each input selector.

■

`

0 ms to 400 ms in 10 msec steps

When using progressive scanning on your Blu-ray 
Disc/DVD player, you may find that the picture and sound 
are out of sync. With this setting, you can correct this by 
delaying the audio signals.
To view the TV picture while setting the delay, press 
ENTER.
To return to the previous screen, press RETURN.

The range of values you can adjust will depend on whether 
your TV supports HDMI Lip Sync and if the “LipSync” 
setting is set to “On” or not (

).

• A/V Sync is disabled when the Direct listening mode is used with 

an analog input source.

■

`

- - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo, 
CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD, 
TAPE, iPod: 

To reset to the default, select “- - -”.

You can enter a preset name for each individual input 
selector for easy identification. When entered, the preset 
name will be displayed.

• You can’t assign the same preset name to multiple input selectors.
• This setting cannot be used for the AM, FM or USB input 

selector.

■

`

ARC:

The audio signal from your TV tuner can be sent to 
the HDMI OUT of the AV receiver.

With this selection, the TV’s audio can be 
automatically selected as a priority among other 
assignments.

`

HDMI:

This can be selected when HDMI IN has been 
assigned as an input source. If both HDMI (HDMI 
IN) and digital audio inputs (COAXIAL IN or 
OPTICAL IN) have been assigned, HDMI input is 
automatically selected as a priority.

`

COAXIAL:

This can be selected when COAXIAL IN has been 
assigned as an input source. If both coaxial and 
HDMI inputs have been assigned, coaxial input is 
automatically selected as a priority.

`

OPTICAL:

This can be selected when OPTICAL IN has been 
assigned as an input source. If both optical and HDMI 
inputs have been assigned, optical input is 
automatically selected as a priority.

`

Analog:

The AV receiver always outputs analog signals.

You can set priorities of audio output when there are both 
digital and analog inputs.

• This setting can be made only for the input source that is assigned 

as HDMI IN, COAXIAL IN, or OPTICAL IN.

*1

You can select “ARC” if you select the TV/CD input selector. 
But you cannot if you’ve selected “Off” in the “Audio Return 
Ch” setting (

).

Preparation
Press the input selector buttons to select an input source.