ONKYO HT-RC460 Manual Do Utilizador

Onkyo components that are connected via 

u are 

controlled by pointing the remote controller at the AV 
receiver, not the component. This allows you to control 
components that are out of view, in a rack, for example.

u

If you want to control an Onkyo component by pointing the 
remote controller directly at it, or you want to control an 
Onkyo component that’s not connected via 

u, use the 

following remote control codes:

`

30627:

Onkyo DVD player without 

u

`

71817:

Onkyo CD player without 

u

`

32900/33100/33500:

Onkyo Blu-ray Disc player

`

32901/33104/33504:

Onkyo HD DVD player

`

70868: 

Onkyo MD recorder without 

u

`

71323: 

Onkyo CD recorder without 

u

`

82990: 

Onkyo Dock without 

u

You can reset a REMOTE MODE button to its default 
remote control code.

You can reset the remote controller to its default settings.

By pressing the REMOTE MODE button that’s been 
programmed with the remote control code for your 
component, you can control your component as described 
below.
For details on entering a remote control code for other 
components, see “Entering Remote Control Codes” 
(

TV is preprogrammed with the remote control code for 
controlling a TV that supports the 

p

 (limited to 

some models). The TV must be able to receive remote 
control commands via 

p and be connected to the 

AV receiver via HDMI. If controlling your TV via 
p doesn’t work very well, program your TV’s 
remote control code into TV and use the TV remote mode 
to control your TV.
Use the following remote control codes:

`

11807/13100/13500:

TV with 

p

By programming the supplied remote controller with the 
appropriate remote control code, you can use it to operate 
your Apple TV.
Use the following remote control codes:

`

02615:

Apple TV

u cable and an analog audio cable (RCA).

See “Connecting Onkyo RI Components” for details 
(

`

42157:

Onkyo cassette tape deck with 

u

`

81993:

Onkyo Dock with 

u

button again.
The remote indicator flashes twice, indicating that the 
button has been reset.
Each REMOTE MODE button is preprogrammed 
with a remote control code. When a button is reset, its 
preprogrammed code is restored.

The remote indicator flashes twice, indicating that the 
remote controller has been reset.