ONKYO HT-RC470 Manual Do Utilizador

The following table indicates the channels you should use 
depending on the number of speakers that you have. 
No matter how many speakers you use, a powered 
subwoofer is recommended for a really powerful and solid 
bass.
To get the best from your surround sound system, you need 
to set the speaker settings automatically (

).

*1

If you’re using only one surround back speaker, connect it to 
the SURROUND BACK or FRONT HIGH L terminals. 

*2

Front high and surround back speakers cannot be used at the 
same time.

The following illustration shows how to connect the 
speakers to each pair of terminals. If you’re using only one 
surround back speaker, connect it to the SURROUND 
BACK or FRONT HIGH L terminals.

• You can specify whether surround back or front high speakers are 

connected in the “Speaker Configuration” menu (

) or 

during Audyssey 2EQ

®

 Room Correction and Speaker Setup 

(

).

Front speakers

✔ ✔ ✔ ✔ ✔ ✔ ✔

Center speaker

✔

✔ ✔ ✔ ✔

Surround speakers

✔ ✔ ✔ ✔ ✔

Surround back speaker

✔

Surround back speakers

✔

Front high speakers

✔

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends 
of the speaker cables, and twist the bare wires tightly, as 
shown.

■

Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends 
of the speaker cables, and twist the bare wires tightly, as 
shown.

■

• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center 

hole of the speaker terminal.

Center

Surround 

right

Front right

Surround 

left

Front left

Surround back/

Front high 

left

Surround back/

Front high 

right

1/2" to 5/8" (12 to 15 mm)

3/8" to 1/2"(10 to 12 mm)