ONKYO HT-RC470 Manual Do Utilizador

• To name a radio preset, select AM or FM, and then select the 

preset (

).

• To restore a name to its default, erase all characters with CLR, 

select “OK” and then press ENTER.

• This setting cannot be used for the NET and USB input selectors.

Using Picture Adjust, you can adjust the picture quality 
and reduce any noise appearing on the screen. 
To view the TV picture while setting, press ENTER. To 
return to the previous screen, press RETURN.

■

This setting determines the aspect ratio.

`

4:3:

`

Full:

`

Zoom:

`

Wide Zoom:

`

Auto:

According to the input signals and monitor output 
setting, the AV receiver automatically selects the 
“4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See 
“Monitor Out” for details on the monitor output 
setting (

).

■

`

Custom:

All settings can be performed manually.

`

Cinema:

Select when the picture source is a movie or alike.

`

Game:

Select when the video source is a game console.

`

Through:

Does not adjust picture quality (changes resolution).

`

Direct:

Does not adjust picture quality (does not change 
resolution). The video coming from an analog input 
and output by HDMI output(s) is processed in the 
same way as “Through”.

With “Picture Mode”, you can change the following 
settings to be suitable for the movie or game screen by one 
operation; “Game Mode”, “Film Mode”, “Edge 
Enhancement”, “Noise Reduction”, “Brightness”, 
“Contrast”, “Hue”, “Saturation” or “Color 
Temperature”.

■

`

`

If video signal delay occurs during playback on a video 
component (i.e., game console), select the corresponding 
input source and set the “Game Mode” setting to “On”. 
The delay will decrease but in return the picture quality will 
become poor.

Space:

Enters a space character.

:

Toggles between lower and upper case characters.

(Left)/ (Right):

Moves the cursor left or right in the Name input 
area.

:

Moves the cursor backward and deletes one 
character.

OK:

Confirms your entry. 

*1

This can also be performed by using +10 on the remote 
controller.

*2

Press CLR on the remote controller to delete all the 
characters you have input.