ONKYO HT-RC470 Manual Do Utilizador

■

DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode 
used when DTS or DTS-HD High Resolution format 
digital audio signals are played (DVD, LD, CD, etc.). 
Specifies the default listening mode for DTS-HD Master 
Audio sources, such as Blu-ray or HD DVD (input via 
HDMI).

■

Other Multich Source
Specifies the default listening mode for multichannel 
PCM sources from HDMI IN such as DVD-Audio, and 
DSD multichannel sources such as Super Audio CD.

■

`

Absolute:

Displayed range is Min, 1 to 99, Max.

`

Relative (THX):

Displayed range is –

QdB, –81dB to +18dB.

With this setting, you can choose how the volume level is 
displayed.
The absolute value 82 is equivalent to the relative value 
0 dB.

• If the absolute value is set to 82, “82Ref” will appear on the 

display and the THX indicator will flash.

■

`

QdB (fully muted), –50dB to –10dB in 10 dB steps.

This setting determines how much the output is muted when 
the muting function is used (

).

■

`

, 50 to 99 (Absolute display)

`

Off, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

■

`

Last, Min, 1 to 99 or Max (Absolute display)

`

, –

QdB, –81dB to +18dB (Relative display)

With this preference, you can specify the volume setting to 
be used each time the AV receiver is turned on.
To use the same volume level that was used when the AV 
receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher than 
the “Maximum Volume” setting.

■

`

–12dB to 0dB to +12dB

With this setting, you can specify the headphone volume 
relative to the main volume. This is useful if there’s a 
volume difference between your speakers and your 
headphones.

“Setup”