ONKYO HT-R368 Manual Do Utilizador

With the UP-A1 Dock, you can easily play the music, 
photo, or movie stored on your Apple iPod/iPhone through 
the AV receiver and enjoy great sound.
You can use the AV receiver’s remote controller to operate 
your iPod/iPhone.

■

Auto Power On
If you start iPod/iPhone playback while the AV receiver is 
on Standby, the AV receiver will automatically turn on and 
select your iPod/iPhone as the input source.

Direct Change
If you start iPod/iPhone playback while listening to another 
input source, the AV receiver will automatically select 
your iPod/iPhone as the input source.

Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to control 
basic iPod/iPhone functions (

).

■

You can use your iPod/iPhone models Alarm Clock 
function to automatically turn on your iPod/iPhone and the 
AV receiver at a specified time. The AV receiver’s input 
source will automatically be set to the PORT selector.

• To use this function, your iPod/iPhone must be in the UP-A1 

Dock, and the UP-A1 Dock must be connected to the AV 
receiver.

• This function works only in the Standard mode (

).

• When you use this function, be sure to set the AV receiver’s 

volume control to a suitable level.

• You cannot use this function for sound effects on your 

iPod/iPhone.

• “UP-A1 ChargeMode” must be set to “On” to enable the Alarm 

Clock (

).

■

The UP-A1 Dock charges your iPod/iPhone models battery 
while your iPod/iPhone is in the UP-A1 Dock connected to 
the AV receiver. While your iPod/iPhone is seated in the 
UP-A1 Dock, its battery will be charged when the AV 
receiver is set to on or standby.
You can specify how the power is fed to your iPod/iPhone 
when the AV receiver is in standby mode (

).

• When UP-A1 Dock that seated iPod/iPhone is connected, the 

power consumption in standby mode slightly increases.

■

If either of the following message is not displayed on the 
AV receiver’s display, check the connection to your 
iPod/iPhone.
• PORT Reading

The AV receiver is checking the connection with the 
dock.

The AV receiver do not support the connected dock.

UP-A1 Dock is connected.

• The AV receiver displays the message “UP-A1” for several 

seconds after recognizing the UP-A1.

The Dock is sold separately. Models sold are different 
depending on the region.
For the latest information on the Onkyo Dock 
components, see the Onkyo web site at: 
http://www.onkyo.com
Before using the Onkyo Dock components, update 
your iPod/iPhone with the latest software, available 
from the Apple web site.
For supported iPod/iPhone models, see the instruction 
manual of the Onkyo Dock.

The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first song.

■

• Functionality depends on your iPod/iPhone model and 

generation.

• Before selecting a different input source, stop iPod/iPhone 

playback to prevent the AV receiver from selecting the 
iPod/iPhone input source by mistake.

• If any accessories are connected to your iPod/iPhone, the AV 

receiver may not be able to select the input source properly.

• When connecting UP-A1 Dock to the radio tuner UP-DT1 with 

AUTO selected by the tuner’s Mode Selector switch, you can 
switch the input source between UP-A1 Dock and the tuner, by 
pressing PORT repeatedly on the front panel.

• While your iPod/iPhone is in the UP-A1 Dock, its volume 

control has no effect. If you adjust your iPod/iPhone models 
volume control while it’s in the UP-A1 Dock, make sure it’s 
not set too high before you reconnect your headphones.

• The Auto Power On function will not work if you set your 

iPod/iPhone in the UP-A1 Dock while it is playing.

• Do not turn off the power with the iPod/iPhone still connected 

to this unit via the UP-A1 Dock.

• Set your iPod/iPhone in the UP-A1 Dock after the AV receiver 

turns on.

• “UP-A1 ChargeMode” must be set to “On” to enable the Auto 

Power On and Direct Change functions (