ONKYO TXNR525 Manual Do Utilizador

Please connect 

a, b, c, d, e and f for 5.1-channel surround.

• Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) 

terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the 
sound will be out of phase and will sound unnatural.

Surround 

speaker R 

e

Surround 

speaker L 

d

Powered 

subwoofer 

f

Gray

a

Front

speaker L

b

Front

speaker R

Green

White

Red

c

Center speaker

Blue

Powered 

subwoofer 

f

• Read the instructions supplied with your speakers.
• By default, speakers for 5.1-channel surround are 

configured to use: front right/front left /center/ 
surround right/surround left/subwoofer.

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the 
ends of the speaker cables, and twist the bare wires 
tightly, as shown.

■

• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the 

center hole of the speaker terminal.

Before connecting the power cord, connect all of 
your speakers and AV components.

1/2" to 5/8" (12 to 15 mm)