ONKYO TXNR525 Manual Do Utilizador

• If a phono equalizer is not installed on the turntable to 

connect, it has to be prepared separately. Use a phono 
equalizer which is compatible with the cartridge of the 
turntable.

• Only the front-panel USB input is compatible with 

iPod/iPhone and Onkyo wireless LAN adapter UWF-1.
UWF-1 can be used with the contents of not more than 
64 kHz, not compatible with Dolby TrueHD and DSD.

The following diagram shows how you can connect 
the AV receiver to your home network. In this 
example, it’s connected to a LAN port on a router, 
which has a 4-port 100Base-TX switch built-in.

Do not connect the AV receiver’s USB port to a USB 
port on your computer. Music on your computer 
cannot be played through the AV receiver in this way.

The default of the assignment for the input selector buttons and jacks are as shown below. These settings can 
be changed. (The assignment for the composite video jacks and the analog audio jacks cannot be changed.)

WAN

LAN

Internet radio

Modem

Computer or media server

Router

p
The AV receiver allows interoperability of the CEC 
(Consumer Electronics Control) specified in the HDMI 
standard, which is known as RIHD. Various linked 
operations can be performed by connecting the AV 
receiver to an RIHD-compatible TV, player, or 
recorder.
Default setting is set to off, so it is required to change 
the setting to on.

The following components are 

p-compatible 

(As of January 2013).

■

• Sharp  TV

■

• Onkyo and Integra 

p-compatible players

• Toshiba players and recorders
• Sharp players and recorders (only when used 

together with Sharp TV)

*

Models other than those mentioned above may have some 
interoperability if compatible with CEC, which is part of the 
HDMI Standard, but operation cannot be guaranteed.

• For proper linked operations, do not connect more 

p-compatible components than the quantities 
specified below, to the HDMI input terminal.
– Blu-ray Disc/DVD players: up to three.
– Blu-ray Disc/DVD recorders/Digital Video Recorders: up 

to three.

– Cable/Satellite Set-top boxes: up to four.

• Do not connect the AV receiver to another AV receiver/AV 

amplifier via HDMI.

• Proper linked operations are not guaranteed when more 

p-compatible components than the above-
mentioned quantities are connected.