ONKYO TXNR525 Manual Do Utilizador

■

With this mode you can enjoy a virtual 
surround sound even with only two or 
three speakers. This works by 
controlling how sounds reach the 
listener’s left and right ears. Good 
results may not be possible if there’s too 
much reverb, so we recommend that 
you use this mode in an environment 
with little or no natural reverb.

A
S
D
F

ZXC

In this mode, the display and video 
circuitry are turned off, minimizing 
possible noise sources for the ultimate in 
high-fidelity audio reproduction. (As the 
analog video circuitry is turned off, only 
video signals input through HDMI IN can 
be output from the HDMI output.)

A
S
D
F

ZXC

In this mode, audio from the input source 
is output without surround-sound 
processing. The speaker configuration 
(presence of speakers) and speaker 
distance settings are enabled, but much 
of the processing set via the audio setup 
is disabled. See “On-screen Setup” for 
more details (

Sound is output from the front left and 
right speakers and subwoofer.

Use this mode when watching an old 
movie with a mono soundtrack, or use it 
with the foreign language soundtracks 
recorded in the left and right channels of 
some movies. It can also be used with 
DVDs or other sources containing 
multiplexed audio, such as karaoke 
DVDs. 

This mode is for use with PCM 
multichannel sources.

D
F

XC

In this mode, audio from the input source 
is output without surround-sound 
processing. The speaker configuration 
(presence of speakers), crossover 
frequency, speaker distance, A/V Sync 
and much of the processing set via the 
audio setup are enabled. See “On-
screen Setup” for more details 
(

).

D

XC

D
F

XC

D

XC

D
F

XC

D

XC

This mode is for use with DTS 96/24 
sources. This is high-resolution DTS 
with a 96 kHz sampling rate and 24-bit 
resolution, providing superior fidelity. 
Use it with DVDs that bear the DTS 
96/24 logo.

D

XC