ONKYO TXNR525 Manual Do Utilizador
Advanced Operations
En-53
■
HDMI Through
`
Off
`
BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD:
Selects the input source for which the HDMI
Through function is enabled.
Through function is enabled.
`
Last:
The HDMI Through function is activated on the
input source selected at the time of setting the
AV receiver to standby mode.
input source selected at the time of setting the
AV receiver to standby mode.
When enabling the HDMI Through function,
regardless of whether the AV receiver is on or in
standby, both audio and video streams from an HDMI
input will be output to the TV or other components via
HDMI connection. The HDMI indicator will be dimly-lit
in standby mode. Note that the indicator may not light
under certain conditions (
regardless of whether the AV receiver is on or in
standby, both audio and video streams from an HDMI
input will be output to the TV or other components via
HDMI connection. The HDMI indicator will be dimly-lit
in standby mode. Note that the indicator may not light
under certain conditions (
This setting is fixed to “Auto” automatically when the
above “HDMI CEC (RIHD)” setting is set to “On”,
resulting in automatic input source selection.
above “HDMI CEC (RIHD)” setting is set to “On”,
resulting in automatic input source selection.
Note
• Only an input source assigned to an HDMI IN via
“HDMI Input” setting is enabled (
).
• The power consumption in standby mode will increase
during the HDMI Through function; however in the following
cases, the power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.
cases, the power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.
• Refer to the connected component’s instruction manual for
details.
• Depending on the connected component, the correct input
source may not be selected with the setting fixed to “Auto”.
• This setting is set to “Off” automatically when the “HDMI
CEC (RIHD)” setting is set to “Off”.
■
Audio TV Out
`
Off
`
On
This preference determines whether the incoming
audio signal is output from the HDMI output. You may
want to turn this preference on if your TV is
connected to the HDMI output and you want to listen
to the audio from a connected component through
your TV’s speakers. Normally, this should be set to
“Off”.
audio signal is output from the HDMI output. You may
want to turn this preference on if your TV is
connected to the HDMI output and you want to listen
to the audio from a connected component through
your TV’s speakers. Normally, this should be set to
“Off”.
Note
• If “On” is selected and the audio can be output from the TV,
the AV receiver will output no sound through its speakers.
In this case, “TV Speaker” appears on the AV receiver’s
display by pressing DISPLAY.
In this case, “TV Speaker” appears on the AV receiver’s
display by pressing DISPLAY.
• When “HDMI CEC (RIHD)” is set to “On”, this setting is
fixed to “Auto”.
• With some TVs and input signals, no sound may be output
even when this setting is set to “On”.
• When “Audio TV Out” or
“
HDMI CEC (RIHD)” is set to
“
On
”
and you’re listening through your TV’s speakers, turning up
the AV receiver’s volume control will make the sound be
output from the AV receiver’s front left and right speakers.
To stop the AV receiver’s speakers producing sound,
change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
the AV receiver’s volume control will make the sound be
output from the AV receiver’s front left and right speakers.
To stop the AV receiver’s speakers producing sound,
change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
• Listening mode cannot be changed when this setting is set
to “On” and the audio is output from the TV.
• This setting is set to “Off” automatically when the “HDMI
CEC (RIHD)” setting is set to “Off”.
■
Audio Return Ch
`
Off
`
Auto:
The audio signal from your TV tuner can be sent
to the HDMI OUT of the AV receiver.
to the HDMI OUT of the AV receiver.
The audio return channel (ARC) function allows an
ARC capable TV to send the audio stream to HDMI
OUT of the AV receiver. To use this function, you
must select the TV/CD input selector and your TV
must be ARC capable. The ARC indicator will light
when the audio signal is detected. Default setting:
“
ARC capable TV to send the audio stream to HDMI
OUT of the AV receiver. To use this function, you
must select the TV/CD input selector and your TV
must be ARC capable. The ARC indicator will light
when the audio signal is detected. Default setting:
“
- - - -
”
Note
• This setting is fixed to “- - - -” when the “HDMI CEC (RIHD)”
setting is set to “Off”.
• This setting is set to “Auto” automatically when the “HDMI
CEC (RIHD)” setting is set to “On” for the first time.
• If you set “Audio Return Ch” to “Auto”, the “Audio
Selector” settings of the TV/CD input selector will be
automatically switched to “ARC” (
automatically switched to “ARC” (
).
Tip
• After changing the settings of the “HDMI CEC (RIHD)”,
“HDMI Through” or “Audio Return Ch”, turn off the power
on all connected pieces of equipment and then turn them on
again. Refer to the user’s manuals for all connected pieces
of equipment.
on all connected pieces of equipment and then turn them on
again. Refer to the user’s manuals for all connected pieces
of equipment.
■
LipSync
`
Off
`
On
This function allows the AV receiver to automatically
correct any delay between the video and the audio,
based on the data from the connected monitor.
correct any delay between the video and the audio,
based on the data from the connected monitor.
Note
• This function works only if your HDMI-compatible TV
supports HDMI Lip Sync.