ONKYO HT-R960 Manual Do Utilizador
82
Advanced Setup
—Continued
Speaker Distance
With these settings, you can specify the distance from
each speaker to the listening position.
each speaker to the listening position.
Note:
• These settings cannot be adjusted while a pair of head-
phones is connected, speaker set B is on, or the multi-
channel DVD input is being used.
channel DVD input is being used.
8
Use the Down [
] button to
select “Surr Back Ch,” and use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
2ch
or
1ch
.
2ch:
Select if two (left and right)
surround back speakers are
connected.
surround back speakers are
connected.
1ch:
Select if one surround back
speaker is connected.
speaker is connected.
Note:
• If the Surround or Surr Back settings
in steps 7 and 8 are set to No, this set-
ting does not appear.
ting does not appear.
9
Press the [SETUP] button.
Setup closes.
1
Measure and make a note of the
distance from each speaker to
the listening position.
distance from each speaker to
the listening position.
2
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
3
Use the Up and Down [
]/[
]
buttons to select “2. Speaker
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
Speaker Setup function (see page 42).
4
Use the Up and Down [
]/[
]
buttons to select “2. Speaker Dis-
tance,” and then press [ENTER].
tance,” and then press [ENTER].
5
While “Unit” is displayed, use the
Left and Right [
Left and Right [
]/[
] buttons to
select “feet” or “meters.”
feet:
Distances can be set in feet.
Range: 1 to 30 feet in 1-foot
steps.
Range: 1 to 30 feet in 1-foot
steps.
meters:
Distances can be set in
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
6
Use the Down [
] button to
select “Left,” and use the Left and
Right [
Right [
]/[
] buttons to specify
the distance for the front speak-
ers, then press the Down [
ers, then press the Down [
] but-
ton to select the next speaker.
7
Repeat step 6 for all speakers.
Note:
Speakers that you set to No in the
“Speaker Configuration” on page 81
cannot be selected.
“Speaker Configuration” on page 81
cannot be selected.
8
Press the [SETUP] button.
Setup closes.
HT-S9100THX_En.book Page 82 Friday, June 27, 2008 4:00 PM