ONKYO HT-R960 Manual Do Utilizador

 

88

 

■

 

With this setting, you can specify the aspect ratio of your 
TV so that menus are displayed properly.

 

Select if your TV is 16:9 (default).

 

Select if your TV is 4:3.

 

■

 

This setting determines where on the screen operation 
details are displayed.

 

Bottom of the screen (default).

 

Top of the screen.

 

■

 

For the onscreen setup menus to display properly, you
must specify the TV system used in your area.

 

Select this to have the AV receiver automati-
cally detect the TV system from the video input 
signals.

 

Select if the TV system in your area is NTSC.

 

Select if the TV system in your area is PAL.

This section explains items on the Hardware menu.

 

• This procedure can also be performed on the AV 

receiver by using its [SETUP], [ENTER], and arrow 
buttons.

 

■

 

When several Onkyo components are used in the same 
room, their remote ID codes may overlap. To differenti-
ate the AV receiver from the other components, you can 
change its remote ID from 1, the default, to 2 or 3.

 

• If you do change the AV receiver’s remote ID, be sure 

to change the remote controller to the same ID (see 
below), otherwise, you won’t be able to control it with 
the remote controller.

 

The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

 

The screen for that item appears.

 

The items are explained below.

 

Setup closes.

HT-S9100THX_En.book Page 88 Friday, June 27, 2008 4:00 PM