ONKYO HT-R758 Manual Do Utilizador

The following illustration shows how to connect the 
speakers to each pair of terminals.

■

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends 
of the speaker cables, and twist the bare wires tightly, as 
shown.

■

• If you are using banana plugs, tighten the speaker 

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center 

hole of the speaker terminal.

The following table indicates the channels you should use 
depending on the number of speakers that you have. 
No matter how many speakers you use, a powered 
subwoofer is recommended for a really powerful and solid 
bass.
To get the best from your surround sound system, you need 
to set the speaker settings automatically (

) or 

manually (

).

The speaker terminals are color-coded for identification 
purpose.

The supplied speaker cable labels are also color-coded and 
you should attach them to the positive (+) side of each 
speaker cable in accordance with the table above. Then all 
you need to do is to match the color of each label to the 
corresponding speaker terminal.

• With the Home Theater System, speaker cable labels are not 

supplied.

1/2" to 5/8" (12 to 15 mm)

Center

Surround 

right

Front right

Surround 

left

Front left

Front speakers

✔

✔

✔

✔

Center speaker

✔

✔

Surround speakers

✔

✔

Front left

White

Front right

Red

Center

Green

Surround left

Blue

Surround right

Gray