ONKYO HT-R758 Manual Do Utilizador

In addition to the main listening room, you can also enjoy 
playback in another room, or as we call Zone 2. And, you 
can select a different source for each room.

This setup allows 5.1-channel playback in your main 
listening room and 2-channel stereo playback in Zone 2.

• The volume of Zone 2 must be set on the Zone 2 amplifier.

■

■

To control Zone 2, you must press ZONE2 on the remote 
controller first.

• Only analog input sources are output by the ZONE 2 LINE 

OUT. Digital input sources are not output. If no sound is heard 
when an input source is selected, verify that the source is 
connected to an analog input.

• You cannot select different AM or FM radio stations for your 

main room and Zone 2. The same AM/FM radio station will be 
heard in each room. Namely, if you have selected an FM station 
for the main room, that station will also be output in Zone 2.

• When you have selected NET or USB as the input selector, the 

last selector selected will be set for Main room and Zone 2.

• When Zone 2 is activated and its input selector is selected, the 

power consumption of standby mode slightly increases.

• While Zone 2 is on, 

u functions will not work.

• When setting the AV receiver to standby mode while Zone 2 is 

active, the Z2 indicator is dimly lit.

• Activating Zone 2 in the main room when the listening mode is 

set to Pure Audio (European and Australian models) will 
automatically switch it to Direct.

Main room

TV

Zone 2

AV receiver

Receiver/

integrated amp

To turn on Zone 2 and select an input source, press 
ZONE 2 followed by an input selector button within 
8 seconds.
Zone 2 turns on, the Z2 indicator lights on the AV 
receiver’s display.

To select the same source as the main room’s, press 
ZONE 2 twice. “Z2 Sel: Source” appears on the AV 
receiver’s display.

The zone is turned off.

Input selector buttons

8RECEIVER

8RECEIVER.

Zone 2 turns on, the Z2 indicator lights on the AV 
receiver’s display.

8RECEIVER.
The zone is turned off.