ONKYO HT-RC360 Manual Do Utilizador

En

To find the best position for your subwoofer, while playing a 
movie or some music with good bass, experiment by placing 
your subwoofer at various positions within the room, and 
choose the one that provides the most satisfying results.
You can connect the powered subwoofer with two 
SUBWOOFER PRE OUT jacks respectively.
The same signal is output from each jack.

• If your subwoofer is unpowered and you’re using an external 

amplifier, connect the subwoofer pre out jack to an input on the 
amplifier.

Bi-amping provides improved bass and treble performance.
When bi-amping is used, the AV receiver is able to drive up 
to a 5.1 speaker system in the main room.
Once you’ve completed the bi-amping connections as shown 
and turned on the AV receiver, you must set the speaker 
setting to enable bi-amping (

• When making the bi-amping connections, be sure to remove the 

jumper bars that link the speakers’ tweeter (high) and woofer 
(low) terminals.

• Bi-amping can be used only with speakers that support bi-

amping. Refer to your speaker manual.

Powered subwoofer

Corner 
position

1/3 of wall

position

Woofer (low)

Tweeter (high)

Front right

Front left