ONKYO HT-RC330 Manual Do Utilizador

En

This section explains how to specify 
which speakers are connected and their 
sizes.
For speakers with a cone diameter larger 
than 6-1/2 inches (16 cm), specify Large 
(full band). For those with a smaller 
diameter, specify Small (default crossover 100 Hz).
The crossover frequency can be changed in the 
“Crossover (Crossover Frequency)” (

• These settings are disabled when:

– a pair of headphones is connected, or
– the  “Audio TV Out” setting is set to “On” (

page 35), or

– “HDMI Ctrl (RIHD)” is set to “On” (

page 35) and 

you’re listening through your TV speakers, or

– Speakers B is on, or
– Speakers A is off.

■

`

Yes:

Select if a subwoofer is connected.

`

No:

Select if no subwoofer is connected.

■

`

Small:

`

Large:

Select based on the cone diameter.

• If  the  “Subwoofer” setting is set to “No”, this setting is fixed at 

“Large” and does not appear.

■

*1

*1

`

Small:

`

Large:

Select based on the cone diameter.

`

None:

Select if no speaker is connected.

*1

If the “Front” setting is set to “Small”, the “Large” option 
cannot be selected.

■

Crossover (Crossover Frequency)
This setting is advantageous for the speakers that you 
specified as “Small” in the “Sp Config (Speaker 
Configuration)” (

page 31). To get the best bass 

performance from your speaker system, you need to set 
the crossover frequency according to the size and 
frequency response of your speakers.

`

40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 
120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your system 
when choosing the crossover frequency.

*

Choose the setting suitable for the speaker.

• For a more accurate setting, look up the frequency response in 

the manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound 

from your subwoofer.

■

`

`

Turn this setting on to boost bass output by feeding bass 
sounds from the front left, right, and center channels to the 
subwoofer. 

• This function can be set only if the “Subwoofer” setting is set to 

“Yes”, and the “Front” setting is set to “Large” (

page 31).

Here you can specify the distance from each speaker to the 
listening position so that the sound from each speaker 
arrives at the listener’s ears as the sound designer 
intended.

• These settings are disabled when:

– a pair of headphones is connected, or
– the  “Audio TV Out” setting is set to “On” (

– “HDMI Ctrl (RIHD)” is set to “On” (

page 35) and 

you’re listening through your TV speakers, or

– Speakers B is on, or
– Speakers A is off.

• Speakers that you set to “No” or “None” in the “Sp Config 

(Speaker Configuration)” (

page 31) cannot be selected.

■

`

feet:

Distances can be set in feet. Range: 1ft to 30ft in 
1 foot steps.

`

meters:

Distances can be set in meters. Range: 0.3m to 9.0m 
in 0.3 meter steps.

(The default setting varies from country to country.)

■

`

Specify the distance from the each speaker to your 
listening position.

Cone diameter

Over 8 in. (20 cm)

40/50/60 Hz

*

6-1/2 to 8 in. (16 to 20 cm)

70/80/90 Hz

*

5-1/4 to 6-1/2 in. (13 to 16 cm)

100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm)

120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

*