ONKYO HT-R980 Manual Do Utilizador

En

*1

If Direct listening mode is selected, “Dynamic EQ” and 
“Dynamic Volume” cannot be selected.

*2

Only when you have selected “Custom” in the “Picture 
Mode” (

46), pressing ENTER allows you to adjust the fol-

lowing items; “Brightness”, “Contrast”, “Hue”, and “Satu-
ration”. Press RETURN to return to the original Video menu.

*3

Depending on the input source and listening mode, not all 
channels shown here output the sound.

*4

When you have entered a custom name in “Name Edit” 
(

45), the input source is displayed with that name. But 

even if not, the component name may be displayed if the AV 
receiver receives it via HDMI connection (

*5

For the PORT input selector, the name of Universal Port 
Option Dock will be displayed.

When you connect an 

u-capable Onkyo component, you 

must configure the input display so that 

u can work 

properly.
This setting can be done only from the front panel.

• DOCK can be selected for the TV/CD, GAME or VCR/DVR 

input selector, but not at the same time.

• Enter the appropriate remote control code before using the 

remote controller for the first time (

• Always turn down the volume before connecting your head-

phones.

• While the headphones plug is inserted in the PHONES jack, the 

speakers are turned off. (The Powered Zone 2 speakers are not 
turned off.)

• When you connect a pair of headphones, the listening mode is 

set to Stereo, unless it’s already set to Stereo, Mono or Direct. 

• Only the Stereo, Direct and Mono listening modes can be used 

with headphones.

With the supplied calibrated microphone, Audyssey 2EQ 
automatically determines the number of speakers con-
nected, their size for purposes of bass management, opti-
mum crossover frequencies to the subwoofer (if present), 
and distances from the primary listening position.
Audyssey 2EQ then removes the distortion caused by 
room acoustics by capturing room acoustical problems 
over the listening area in both the frequency and time 
domain. The result is clear, well-balanced sound for every-
one. Enabling Audyssey 2EQ allows you to also use 
Audyssey Dynamic EQ

®

, which maintains the proper 

octave-to-octave balance at any volume level (

43).

Before using this function, connect and position all of 
your speakers.
If “Dynamic EQ” is set to “On” (

43), the “Equalizer” 

setting will be set to “Audyssey” (

40). On the other 

hand, if it is set to “Off”, the “Dynamic Volume” setting 
will be set to “Off” (

It takes about 15 minutes to complete Audyssey 2EQ 
Room Correction and Speaker Setup for 3 positions. Total 
measurement time varies depending on the number of 
speakers.

(about 3 seconds) to change the input display.
Repeat this step to select “MD”, “CDR”, “DOCK” 
or “TAPE”.
For the TV/CD input selector, the input display 
changes in this order: 

For the GAME input selector, the setting changes in 
this order: 

For the VCR/DVR input selector, the setting 
changes in this order: 

TV/CD  

→  

MD  

→  

→

 

→

 

→

 

↔ DOCK

↔ DOCK