ONKYO HT-R980 Manual Do Utilizador

En

With the RI Dock, you can easily play the music stored on 
your Apple iPod through the AV receiver and enjoy great 
sound, and watch iPod slideshows and videos on your TV. 
In addition, the onscreen display (OSD) allows you to 
view, navigate, and select your iPod contents on your TV, 
and with the supplied remote controller, you can control 
your iPod from the comfort of your sofa. You can even use 
the AV receiver’s remote controller to operate your iPod.

• Enter the appropriate remote control code before using the AV 

receiver’s remote controller for the first time (

61).

• Connect the RI Dock to the AV receiver with an 

u cable 

56).

• Set the RI Dock’s RI MODE switch to “HDD” or “HDD/

DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (

■

System On
When you turn on the AV receiver, the RI Dock and iPod 
turn on automatically. In addition, when the RI Dock and 
iPod are on, the AV receiver can be turned on by pressing 
ON/STANDBY.
Auto Power On

If you press the remote controller’s 

1 while the AV 

receiver is on Standby, the AV receiver will automatically 
turn on, select your iPod as the input source, and your 
iPod will start playback.
Direct Change
If you start iPod playback while listening to another input 
source, the AV receiver will automatically switch to the 
input to which the RI Dock is connected.
Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to control 
basic iPod functions.
Using Your iPod models Alarm Clock
If you use the Alarm Clock function on your iPod to start 
playback, the AV receiver will automatically turn on at the 
specified time and select your iPod as the input source.

• Linked operations do not work with video playback or when the 

alarm is set to play a sound.

• If you use your iPod with any other accessories, iPod playback 

detection may not work.

• This function works only in the Standard mode (

59).

By pressing REMOTE MODE that’s been programmed 
with the remote control code for your Dock, you can con-
trol your iPod in the Dock.
See “Entering Remote Control Codes” for details on 
entering a remote control code (

61).

See the Dock’s instruction manual for more information.

■

PORT is preprogrammed with the remote control code for 
controlling a Dock with Universal Port connector.
You can control your iPod when “PORT” is selected as 
the input source.

You must enter a remote control code 82990 first (

■

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

• ON/STANDBY may not work with a remote control 

code (without 

u). In this case, make an u connection 

and enter a remote control code 81993 (with 

u).

In this case, make an 

u connection and enter a remote

control code 81993 (with 

u).

• Set the AV receiver’s Input Display to “DOCK” (

23).

■

• Use the AV receiver’s volume control to adjust the playback 

volume.

• While your iPod is inserted in the RI Dock, its volume control 

has no effect. If you adjust your iPod models volume control 
while it’s in the UP-A1 Dock, make sure it’s not set too high 
before you reconnect your headphones.