Russound CAM6.6 Manual Do Utilizador

53

9. AUTO PLAY? – 

“Yes” tells the CAM6.6 to issue a PLAY command whenever the 

(AtoPl)

source is selected for listening. This option is skipped if the 
source type (COMMAND TYPE) chosen does not have a PLAY 
command associated with it.

10. SAVE CHANGES? – 

Select “yes” to save changes. Procedure returns to SOURCE 

(Save?)

NUM to allow configuration of another source. 

Key Configuration defines zone-specific key functions for each source. 

1. ZONE NUM – 

Select the zone the key will be configured for. Changes are made

(Zone#) 

for that zone only; default setting is “All Zones.”

2. SOURCE NUM – 

Select the source the key will be configured for.

(Src #)

3. SELECT A KEY – 

Using + or -, select the keypad key to be configured.

(SelKy)

4. KEY TYPE – 

Either “Key Press,” “Key Hold” or “Both” will activate the command.

(KeyTp) 

5. KEY NAME – 

Name that appears on the keypad display when the command is

(KeyNm)

activated. 

6. COMMAND TYPE – 

Select the type of source command (e.g., CD, DVD, etc.).

(CmdTp) 

a. Selected: Learned IR –

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

The key configuration is cleared. Procedure advances to SAVE

(Unasg)

CHANGES (step 9)

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 8)

(Macro)                                                                                    (continued)