Pioneer VSX-322-K Manual Do Utilizador

En

Use a PAL connector (not supplied) to connect an external 

FM antenna.

Connect a 5 m to 6 m length of vinyl-coated wire to the AM 

antenna terminal without disconnecting the supplied AM 

loop antenna.
For the best possible reception, suspend horizontally 

outdoors.

Only plug in after you have connected all your components to 

this receiver, including the speakers.

• Handle the power cord by the plug part. Do not pull out 

the plug by tugging the cord, and never touch the power 

cord when your hands are wet, as this could cause a short 

circuit or electric shock. Do not place the unit, a piece of 

furniture, or other object on the power cord or pinch the 

cord in any other way. Never make a knot in the cord or tie 

it with other cables. The power cords should be routed so 

that they are not likely to be stepped on. A damaged 

power cord can cause a fire or give you an electric shock. 

Check the power cord once in a while. If you find it 

damaged, ask your nearest Pioneer authorized 

independent service company for a replacement.

• Do not use any power cord other than the one supplied 

with this unit.

• Do not use the supplied power cord for any purpose other 

than that described below.

• The receiver should be disconnected by removing the 

mains plug from the wall socket when not in regular use, 

e.g., when on vacation.

• After this receiver is connected to an AC outlet, a 2 

second to 10 second HDMI initialization process begins. 

You cannot carry out any operations during this process. 

The HDMI indicator in the front panel display blinks 

during this process, and you can turn on this receiver 

once it has stopped blinking. When you set ARC at  HDMI 

setup to OFF, you can skip this process. For details, see 

ARC (Audio Return Channel) function on page 27.

One-touch 

PAL connector

75 Ω coaxial cable

Outdoor 

antenna

5 m to 6 m

Indoor antenna 

(vinyl-coated wire)