Pioneer VSX-1325-K Manual Do Utilizador

En

LFE 
(LFE 
Attenuate)

Some audio sources include 
ultra-low bass tones. Set the LFE 
attenuator as necessary to 
prevent the ultra-low bass tones 
from distorting the sound from 
the speakers. 

The LFE is not limited when set to 
0 dB, which is the recommended 
value. When set to –5 dB, –10 dB, 
–15 dB or –20 dB, the LFE is 
limited by the respective degree. 
When OFF is selected, no sound 
is output from the LFE channel.

0dB/ –5dB/ 

e

Brings out detail in SACDs by 
maximizing the dynamic range 
(during digital processing).

f

(HDMI 
Audio)

Specifies the routing of the HDMI 
audio signal out of this receiver 
(amp) or through to a TV. When 
THROUGH is selected, no sound 
is output from this receiver.

A. DELAY
(Auto 
delay)

This feature automatically 
corrects the audio-to-video delay 
between components connected 
with an HDMI cable. The audio 
delay time is set depending on the 
operational status of the display 
connected with an HDMI cable. 
The video delay time is 
automatically adjusted according 

to the audio delay time.

g

h

(Center 
Width)
(Applicable 
only when 
using a 
center 
speaker)

Provides a better blend of the 
front speakers by spreading the 
center channel between the front 
right and left speakers, making it 
sound wider (higher settings) or 
narrower (lower settings). 

0 to 7

Default: 3

h

Adjusts the depth of the surround 
sound balance from front to back, 
making the sound more distant 
(minus settings), or more forward 
(positive settings).

–3 to +3

Default: 0

h

Extends the front stereo image to 
include the surround speakers for 
a ‘wraparound’ effect.

i

(Center 
Image)
(Applicable 
only when 
using a 
center 
speaker)

Adjusts the center image to 
create a wider stereo effect with 
vocals. Adjust the effect from 0 
(all center channel sent to front 
right and left speakers) to 10 
(center channel sent to the center 
speaker only).

0 to 10

Defaults:

Neo:6 MUSIC: 

Neo:6 

CINEMA: 10

Sets the effect level for the 
currently selected Advanced 
Surround or ALC mode (each 
mode can be set separately).

10 to 90

H.GAIN
(Height 
Gain)

Adjusts the output from the front 
height speaker when listening in 
DOLBY PLIIz HEIGHT mode. If set 
to HIGH, the sound from the top 
will be more emphasized.

V.SB
(Virtual 
Surround 
Back)

When you’re not using surround 
back speakers, selecting this 
mode allows you to hear a virtual 
surround back channel through 
your surround speakers. You can 
choose to listen to sources with 
no surround back channel 
information, or if the material 
sounds better in the format (for 
example, 5.1) for which it was 
originally encoded, you can have 
the receiver only apply this effect 
to 6.1 encoded sources like Dolby 
Digital EX or DTS-ES.

j

V.HEIGHT
(Virtual 
Front 
Height)

When you’re not using front 
height speakers, selecting this 
mode allows you to hear a virtual 
front height channel through your 

front speakers.

k

a.The adjustment can be made only when TONE is set to ON.
b.With the iPod/USB, INTERNET RADIO or ADAPTER PORT input 

function, by default S.RTRV is set to ON.

c.UP1 to UP4 can be selected only when the front height speaker is 

connected. The presence or absence of effects depends on the 
listening mode.

d.The initially set AUTO is only available for Dolby TrueHD signals. 

Select MAX or MID for signals other than Dolby TrueHD.

e.You shouldn’t have any problems using this with most SACD 

discs, but if the sound distorts, it is best to switch the gain setting 
back to 0 dB.

f. • The HDMI Audio setting cannot be switched while performing 

synchronized amp mode operations.
• The synchronized amp mode must be turned on in order to play 
the receiver’s HDMI audio and video input signals from the TV with 
the receiver’s power in the standby mode. See About synchronized 
operations on page 57.

g.This feature is only available when the connected display supports 

the automatic audio/video synchronizing capability (‘lipsync’) for 
HDMI. If you find the automatically set delay time unsuitable, set A. 
DELAY to OFF and adjust the delay time manually. For more details 
about the lipsync feature of your display, contact the manufacturer 
directly.

h.Only when listening to 2-channel sources in Dolby Pro Logic IIx 

Music/Dolby Pro Logic II Music mode.

i. Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA 

mode.

j. • You can’t use the Virtual Surround Back mode when the 

headphones are connected to this receiver or when any of the 
stereo, Front Stage Surround Advance, Sound Retriever Air or 
Stream Direct modes is selected.
• You can only use the Virtual Surround Back mode if the surround 
speakers are on and the SB setting is set to NO or if Front Bi-Amp 
or ZONE 2 is selected at Speaker System. It can also be used when 
Speaker B is selected at Speaker system and SP

AB is selected 

with the SPEAKERS button.
• When inputting Dolby True HD, DTS-HD or DTS Express audio 
signals, the Virtual Surround Back mode cannot be used if no 
surround signals are recorded in the source.

VSX-1325_UXJCB.book  60 ページ  ２０１０年３月９日　火曜日　午後３時４分