Pioneer VSX-919AH-S Manual Do Utilizador
Controls and displays
02
9
En
9
PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
headphones are connected, there is no sound
output from the speakers.
10 Listening mode buttons
AUTO SURR/ALC/STREAM DIRECT –
Switches between Auto Surround (page 52),
Auto level control mode and Stream Direct
mode (page 55).
Switches between Auto Surround (page 52),
Auto level control mode and Stream Direct
mode (page 55).
STEREO – Switches between stereo
playback and Front Stage Surround
Advance modes (page 54).
playback and Front Stage Surround
Advance modes (page 54).
ADVANCED SURROUND – Use to switch
between the various surround modes
(page 53).
between the various surround modes
(page 53).
STANDARD SURROUND – Press for
Standard decoding and to switch between
the various
Standard decoding and to switch between
the various
2 Pro Logic IIx and Neo:6
options (page 52).
11 SPEAKERS
Use to change the speaker system (page 68).
Use to change the speaker system (page 68).
12 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see
MULTI-ZONE setup on page 31) use these
controls to control the sub zone from the main
zone (see Using the MULTI-ZONE controls on
page 68).
If you’ve made MULTI-ZONE connections (see
MULTI-ZONE setup on page 31) use these
controls to control the sub zone from the main
zone (see Using the MULTI-ZONE controls on
page 68).
13 iPod/iPhone/USB, VIDEO INPUT
terminals
Use to connect your Apple iPod or iPhone as
an audio and video source, or connect a USB
device for audio and photo playback (page 34).
terminals
Use to connect your Apple iPod or iPhone as
an audio and video source, or connect a USB
device for audio and photo playback (page 34).
See Connecting a component to the front panel
inputs on page 33.
inputs on page 33.
14 MCACC SETUP MIC jack
Use to connect the supplied microphone
(page 37).
Use to connect the supplied microphone
(page 37).
Display
1
SIGNAL indicators
Light to indicate the currently selected input
signal. AUTO lights when the receiver is set to
select the input signal automatically (page 57).
signal. AUTO lights when the receiver is set to
select the input signal automatically (page 57).
2
Program format indicators
Light to indicate the channels being input
when PCM signals are being input. They do not
indicate the audio signals being output from
the receiver.
when PCM signals are being input. They do not
indicate the audio signals being output from
the receiver.
L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( ))
indicators light when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above,
the mono surround channel or matrix encode flag
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( ))
indicators light when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above,
the mono surround channel or matrix encode flag
3
Digital format indicators
Light when a signal encoded in the corresponding
format is detected.
format is detected.
PCM
HDMI
DIGITAL
ANALOG
L
C
R
SL
SR
XL
XR
XC
LFE
AUTO
DIGITAL PLUS
AUTO SURROUND
STREAM DIRECT
PROLOGIC x Neo:6
PROLOGIC x Neo:6
ADV.SURROUND
STEREO STANDARD
SP AB SLEEP
SP AB SLEEP
DSD PCM
DTS HD ES 96/24
MSTR
S.RTRV SOUND UP MIX OVER MONO
dB
2
MULTI-ZONE
STEREO
TrueHD WMA9Pro
TUNED
PQLS ALC ATT
2
2
USB
VIDEO
TV
DVD
HDMI
DVR
BD
CD
TUNER
CD-R
iPod
[ 2 ]
[ 3 ]
[ 4 ]
2
1
3
12
8
9 10
7
6
5
13
11
14
15
16
22
23
18
19
20 21
17
10
4
VSX-1019_DF.book 9 ページ 2009年3月13日 金曜日 午前9時58分