Pioneer VSX-D511 Manual Do Utilizador

The following steps show you how to tune to FM
and AM radio broadcasts using the automatic
(search) and manual (step) tuning functions.
Once you are tuned to a station you can
memorize the frequency for recall later—see
Saving station presets on the next page for more
on how to do this.

control to select the tuner.
You can also use the 

SELECTOR dial on the front panel.

band (FM or AM), if necessary.
Each press switches the band between FM and
AM.

There are three ways to do this:

Automatic tuning
To search for stations in the currently
selected band, press and hold the 

+ / – buttons for about a second. The
receiver will start searching for the next
station, stopping when it has found one.
Repeat to search for other stations.

Manual tuning
To change the frequency one step at a
time, press the 

TUNING +/– buttons.

High speed tuning
Press and hold the 

TUNING + / – buttons

for high speed tuning. Release the button
at the frequency you want.

If the 

TUNED or STEREO indicators don't light

when tuning to an fm station because the
signal is weak, press the 

MPX button to switch

the receiver into mono reception mode. This
should improve the sound quality and allow you
to enjoy the broadcast.